[Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?

[Kostas SV1DPI]

if you have different group names (I suppose TA3J and TA3J/4), do this

File>preferences>rep/lab  under Greeting write

@@....73 de %%

this will print tnx (or pse) ... de TA3J (or TA3J/4)

%% prints the group name

dx4win will print different labels for every different group name. I do 
this all time


On 15/09/2026 22:36, ON4AOI via DX4WIN wrote:
> Berkin,
> F8 and select the 1st groupnumber
> Then you have only those qso's
> Now you can print only these qso's when you use this filter
>
> Guy
>
> -----Original Message-----
> From: Berkin AYDOGMUS, TA3J <ta3j at berkinaydogmus.com>
> Sent: Tuesday, September 15, 2026 9:17 PM
> To: 'ON4AOI' <on4aoi at skynet.be>
> Cc: dx4win at mailman.qth.net
> Subject: RE: [Dx4win] How to force one QSO per QSL label in DX4WIN
> 9.0.9.1259?
>
> Hello Guy,
>
> Yes, I have separate group numbers for TA3J and TA3J/4.
>
> 73,
>
> Berkin AYDOGMUS, TA3J
> https://www.berkinaydogmus.com
>
> ---
>
> -----Original Message-----
> From: ON4AOI [mailto:on4aoi at skynet.be]
> Sent: Tuesday, September 15, 2026 4:22 PM
> To: 'Berkin AYDOGMUS, TA3J' <ta3j at berkinaydogmus.com>
> Cc: dx4win at mailman.qth.net
> Subject: RE: [Dx4win] How to force one QSO per QSL label in DX4WIN
> 9.0.9.1259?
>
> Berkin
> Do you have separate groupnumbers for TA3J and TA3J/4 ?
> Then its easy if not then a lot of work
>
> Guy
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
> Behalf Of Berkin AYDOGMUS, TA3J via DX4WIN
> Sent: Tuesday, September 15, 2026 12:21 PM
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?
>
> Hello,
>
> I am using DX4WIN version 9.0.9.1259 and I am trying to print QSL labels on
> a custom 70 x 35 mm label sheet.
>
> In the Custom Label Editor I have set Max QSOs = 1.
>
> However, DX4WIN still prints two QSOs with the same DX station on one label.
>
> For example, with FR5DX:
>
> 10-Dec-2000 QSO was made with my callsign TA3J
> 15-Aug-2004 QSO was made with my callsign TA3J/4
>
> These QSOs must go on different QSL cards, so I need one QSO per label,
> regardless of the DX station callsign.
>
> I also tested Print Labels in Sequence, but DX4WIN still combined two QSOs
> on the same label.
>
> Is there a setting or known workaround in DX4WIN 9.0.9.1259 to force exactly
> one QSO per QSL label?
>
> Thank you very much for your help.
>
> 73,
>
> Berkin AYDOGMUS, TA3J
> https://www.berkinaydogmus.com
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html