[Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?

[ON4AOI]

I am not sure that this solves his problem Kostas
He needs to separate both logs if they are in one log
Can be done with a date filter.
He can use export or use multi qso changes.
It can be done but could take some time if there are
Other qso's involved


Guy 


-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of Kostas SV1DPI via DX4WIN
Sent: Tuesday, September 15, 2026 8:02 PM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?

under label editor reduce the label height to have room only for one qso!  This will fool dx4win and will print just one qso. The vertical pitch number will show to dx4win the real height of the label.

These are my notes in printing with dx4win

https://qsl.net/sv1dpi/en/dx4win/printqsos.html

73 Kostas SV1DPI

On 15/09/2026 18:37, Jay Chamberlain via DX4WIN wrote:
> I think I would just go to the first QSO and select "Label Yes". Print 
> the label and repeat for the 2nd QSO.
>
>
>
>
>
> *NS4JayJay ChamberlainFredericksburg, VAUSI Committeewww.usislands.org
> <http://www.usislands.org>*
>
> On Tue, Sep 15, 2026 at 9:22 AM ON4AOI via DX4WIN 
> <dx4win at mailman.qth.net>
> wrote:
>
>> Berkin
>> Do you have separate groupnumbers for TA3J and TA3J/4 ?
>> Then its easy if not then a lot of work
>>
>> Guy
>>
>> -----Original Message-----
>> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> 
>> On Behalf Of Berkin AYDOGMUS, TA3J via DX4WIN
>> Sent: Tuesday, September 15, 2026 12:21 PM
>> To: dx4win at mailman.qth.net
>> Subject: [Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?
>>
>> Hello,
>>
>> I am using DX4WIN version 9.0.9.1259 and I am trying to print QSL 
>> labels on a custom 70 x 35 mm label sheet.
>>
>> In the Custom Label Editor I have set Max QSOs = 1.
>>
>> However, DX4WIN still prints two QSOs with the same DX station on one 
>> label.
>>
>> For example, with FR5DX:
>>
>> 10-Dec-2000 QSO was made with my callsign TA3J
>> 15-Aug-2004 QSO was made with my callsign TA3J/4
>>
>> These QSOs must go on different QSL cards, so I need one QSO per 
>> label, regardless of the DX station callsign.
>>
>> I also tested Print Labels in Sequence, but DX4WIN still combined two 
>> QSOs on the same label.
>>
>> Is there a setting or known workaround in DX4WIN 9.0.9.1259 to force 
>> exactly one QSO per QSL label?
>>
>> Thank you very much for your help.
>>
>> 73,
>>
>> Berkin AYDOGMUS, TA3J
>> https://www.berkinaydogmus.com
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html