[Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?

[ON4AOI]

Berkin
Do you have separate groupnumbers for TA3J and TA3J/4 ?
Then its easy if not then a lot of work 

Guy

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Berkin AYDOGMUS, TA3J via DX4WIN
Sent: Tuesday, September 15, 2026 12:21 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] How to force one QSO per QSL label in DX4WIN 9.0.9.1259?

Hello,

I am using DX4WIN version 9.0.9.1259 and I am trying to print QSL labels on
a custom 70 x 35 mm label sheet.

In the Custom Label Editor I have set Max QSOs = 1.

However, DX4WIN still prints two QSOs with the same DX station on one label.

For example, with FR5DX:

10-Dec-2000 QSO was made with my callsign TA3J
15-Aug-2004 QSO was made with my callsign TA3J/4

These QSOs must go on different QSL cards, so I need one QSO per label,
regardless of the DX station callsign.

I also tested Print Labels in Sequence, but DX4WIN still combined two QSOs
on the same label.

Is there a setting or known workaround in DX4WIN 9.0.9.1259 to force exactly
one QSO per QSL label?

Thank you very much for your help.

73,

Berkin AYDOGMUS, TA3J
https://www.berkinaydogmus.com

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html