[Dx4win] Querie

[k2dbk at k2dbk.com]

Hi John Paul,

If you're using DX4WIN 9+, click on LoTW on the QSO window, then click
Export to LoTW. That will create the ADIF file and mark the QSOs as
uploaded.

If you're using an older version that doesn't have built-in LoTW support,
you'll need to click on File->Import/Export->File->Export. Note that will
not mark the QSOs as uploaded (though in older versions there isn't a field
for that anyway). 

Once you've got the ADIF you'll need to use TQSL to upload. A quick-start to
using LoTW is available here:
https://www.arrl.org/quick-start-tqsl?gad_source=1&gad_campaignid=2211368364
8&gbraid=0AAAAAoySm9-sjsSw9BKhyDVbErxSN0dYg&gclid=CjwKCAiA2PrMBhA4EiwAwpHyCx
lX50jBnHW60fy3KmG3E7iMjK7Jvx0z-cEAvkYiy2wQxjkbGiZTJhoCECMQAvD_BwE

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of John Paul Keon
Sent: Wednesday, February 25, 2026 12:36 PM
To: dx4win-request at mailman.qth.net; dx4win at mailman.qth.net
Subject: [Dx4win] Querie

I know I had to ask this once before.

I can not find my notes and need some help.

I am trying to upload my log .dxl to LOTW.

I am using the route I wrote down but cannot figure out how to get it to a
ADIF or ADI file.

I use File>Export/Import> and this is where I stop.....
I am trying to change it to a ADI log and ADI or ADIF does not come
up....????

What am I doing wrong?

I have the manual printed and am reading the section DX4WIN TO LOTW and I
still can not figure out how to get the .adi or .adif extension on the
file????

John Paul //  AB4PP
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html