[Dx4win] Possible software glitch?

[ON4AOI]

Bernie,
it all depends on your AWARD settings for DXCC

IF in Reports|AWARDS|DXCC : Phone -CW & DIGITAL and Image is selected
DX4WIN will look for those 4 qualifiers no matter what Band
If you unselect for example Digital & Image dx4win will ignore these modes
on any band
I only unselect Image since I never have done that But unselecting Digital
is risky
Or you have to unselect before a submission if you are sure there is no ATNO
in digital mode only
And then put it back on afterwards when all is done.

Guy ON4AOI
  

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of wo2n at att.net
Sent: Monday, January 15, 2024 11:58 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Possible software glitch?


Hi doing a LOTW submission-

Logbook of the world is using one contact to confirm a new mode and new band

Dx4win is using two contacts to do the same thing Dx4win submitting one qsl
for  FT 8 mode  on 10m band -already confirmed CW SSB

Dx4win is using  other QSL  17m  QSL for new band only 

What I did here remove the 10 m FT 8 for mode and I added the mode to 17 m
new band QSL -1 qsl 

I now match LOTW

THE 10 M FT8 would only be a band fill in my log?

Is Dx4win being redundant?

Both contacts were confirmed on LOTW same day

73 de Bernie/WO2N>
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html