[Dx4win] IC-7610 x DX4Win

[Jim Reisert AD1C]

On Sun, Oct 29, 2023 at 10:22 AM Ricardo A. Rodrigues wrote:

> Dear friends, I am having a lot of difficulty connecting my IC-7610 with
> DX4Win. With the same parameters, the IC-7610 connects with the N1MM
> without problems. Before updating the firmware I was able to connect using
> the IC-7700 parameters. Can someone please give me a tip on where I'm going
> wrong?

Hi Dick,

I'm sorry for your problems.

What version of DX4WIN are you using?  Is the baud rate set correctly?
 If it's a non-standard baud rate, you will have to uncheck the box in
the Rig setup.  What kind of interface are you using?

The latest IC-7610 Rig driver for DX4WIN 9.x is here:

https://ad1c.us/dx4win/radios/

Also make sure that the IC-7610 is running the latest firmware.  If
you need help, try here:

https://groups.io/g/ic-7610

I have the same radio and it works very well with DX4WIN 9.x

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us