[Dx4win] Can't open window with File, Radio and Help commands

[Jim Pyle]

Jim,

Yes, the problem is solved.  Mike referred me to Kostas's instruction
sheet, which worked perfectly.  Thank you for following up.

73,
Jim, AA8OY

On Wed, Mar 1, 2023 at 1:43 PM Jim Reisert AD1C <jjreisert at alum.mit.edu>
wrote:

> Jim, is this problem solved?
>
> On Sat, Feb 25, 2023 at 4:47 AM Mike Cizek W0VTT <mgcizek at gmail.com>
> wrote:
> >
> > Hello Jim,
> >
> > The window is open, but it's hiding somewhere.  This comes up regularly
> and
> > Kostas has posted instructions on finding lost windows.  The one you
> want is
> > the Master window, so search for [W-MASTR]
> >
> > ----
> > 73,
> > Mike Cizek W0VTT
> >
> >
> > [Dx4win] Lost Windows in version 9
> > Kostas SV1DPI Wed, 27 Jun 2018 02:54:24 -0700
> > From time to time, I have seen questions about "lost" windows in version
> 9.
> >
> > I found a general solution for this and I post it as a future reference
> (for
> > me as well)
> >
> > Go to file>preferences and write your configuration file.
> > Close the dx4win
> > Go to dx4w903/save directory and rename config.dat to config_old.dat
> > Edit with notepad (not with word) the file config.txt
> > At the end of the file there are several sections with the first letter
> > [W-XXX] and below something like
> >
> > Height=192
> > Left=300
> > Top=300 etc
> >
> > Find the window you are interesting, for example packet window is
> [W-PACK]
> > Change the value of Left and Top to zero. example
> > Left=0
> > Top=0
> > Save the config.txt
> > Open dx4win
> > Go to file>preferences and Load configuration file
> > Choose dx4903/save/config.txt (the file you just saved)
> > Now the window will open on the left-upper corner.
> >
> > Move it where you want and write again your config.txt as a backup for
> the
> > future.
> > Don't forget to open your own log again as dx4win loaded the Samplelog!
> > If something that you don't like happens, close to dx4win and go to
> again in
> > dx4w903/save directory and rename config_old.dat to config.dat
> >
> >
> > -----Original Message-----
> > From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
> > Behalf Of Jim Pyle
> > Sent: Friday, 24 February, 2023 23:25
> > To: DX4WIN Reflector <dx4win at mailman.qth.net>
> > Subject: [Dx4win] Can't open window with File, Radio and Help commands
> >
> > I closed DX4WIN and reloaded the program a while later.  For whatever
> reason
> > the window containing the  "*File, Radio and Help*"
> > commands did not open.  I could not find the correct link to get it to
> open.
> > I'm hoping someone can advise the correct keystrokes to get it open.
> >
> > Thanks, Jim, AA8OY
> > ______________________________________________________________
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> > ______________________________________________________________
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us
>