[Dx4win] need help generating POTA listing worked report

[k1oa at k1oa.com]

Hi Dima,

Thanks for the reply. I figured out my issue.

I had a cutoff of 365 days configured in Setup|Personal so that was 
constraining what was generated
by my POTA report. Any POTA contacts that were confirmed were not 
subject to that cutoff so those
were being displayed OK, just not the ones older than 365 days and 
unconfirmed.

73,
Scott K1OA


On 2023-06-04 07:43, UA3AGW  Dmitry Zaslavsky wrote:
> Hi Scott and the group!
> 
> I’ve never tried to generate a report for POTA, however  for any
> other Custom Award except for those listed individually — a
> generated report contains a mixture of all  previously entered
> contacts for awards marked when a QSO — RRA CISA USIA etc etc ! In
> another words — when I want to see my results for certain award by
> selecting it in the box — I will see all QSOs for all kinds of
> custom awards instead ! At least — in my case it only works correct
> when you have a single custom award selected and marked. I wrote about
> it several times in the past but got no feedback at all !
> 
> I‘ve never tried to generate a report, in particular for POTA,
> however, for any other "custom" awards selected from the pop-up menu,
> except for those listed separately - the generated report contains a
> mixture of all previously entered and selected contacts for awards
> entered logged during the QSO with the corresponding mark — RRA CISA
> USIA, etc., etc. ! In other words — when I want to see my results
> for a certain award by selecting it in the pop-up menu box - instead I
> will see all valid QSOs for all kinds of Custom awards in one stack!
> At least in my case, it only works correctly if you have selected and
> marked one and only one Custom award. I've reported about this problem
> here several times in the past, but haven't received any feedback at
> all!
> 
> Looks like nobody is using this S/W for this kind of submissions
> unlike standard ones or just regular logging stuff !
> 
> Best 73’s ! Dima, UA3AGW
> 
>> Воскресенье, 4 июня 2023, 15:07 +03:00 от
>> k1oa at k1oa.com:
>> 
>> Hi,
>> 
>> I'm running DX4WIN v9.0.9.1259 on Win10.
>> 
>> When I use the Report Generator to create a Listing Worked report
>> for my
>> POTA custom award it doesn't list
>> all QSOs that I have in my log marked as POTA contacts with assigned
>> park numbers. It looks like there is a
>> date cutoff being applied but I can't figure out where that date is
>> configured. The dates in
>> File->Awards->Custom are all blank which I think means no date
>> filtering
>> is applied.
>> 
>> 73,
>> Scott K1OA
>> 
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> --
> Dmitry Zaslavsky
> Отправлено из Почты Mail.ru [1]
> 
> 
> Links:
> ------
> [1] https://trk.mail.ru/c/zzm979