[Dx4win] Trouble getting Icom 7610 recognized

[Kostas SV1DPI]

I have not an icom, but I read the manual for a while. I see that 
default for CI-V baud rate is auto. Or maybe you need to see CI-V USB 
baud rate which is also auto. Try have the same with your settings in 
one of them. The decode baud rate which is 9600 by default, probably is 
something other

73 Kostas SV1DPI

Στις 26/9/2022 16:36, ο/η kq3f at comcast.net έγραψε:
> Hello all!
>
>   
>
> Somehow DX4Win is no longer recognizing my Icom 7610, which it used to do
> with no problem. Oddly, N1MM+ recognizes it just fine. Even more oddly, I
> have an Icom 7600 as a second radio and DX4Win recognizes that one as well.
>
>   
>
> Here are my settings:
>
>   
>
> Type: ICOM 7610_500Hz-V7
>
> Address: 98H
>
> Baud: 9600
>
> COM Port: COM5 (same as N1MM+)
>
> Poll rate: 5000
>
> DTR/RTS both NOT checked
>
>   
>
> I have similar settings for the Icom 7600 only 7AH for the address and COM3.
> Works fine. So I'm stumped.
>
>   
>
> Any idea welcome. It must be something simple (and dumb, on my part).
> Thanks!
>
>   
>
> 73, Joe KQ3F
>
>   
>
>   
>
> ______________________________________________________________
> DX4WIN mailing list
> Home:http://mailman.qth.net/mailman/listinfo/dx4win
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:DX4WIN at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html