[Dx4win] Moving logs to DX4WIN & opening a packet cluster window

[Mike Cizek W0VTT]

Hello Jim,

If you are using a regular internet cluster use the following settings:
File | Preferences | Packet 1:
Type = Regular
COM Port = TCP/IP
Message Handshake = (blank)
Baud Rate = 9600
Flow Control = None
File | Save Changes and exit
File | Preferences | File | Write configuration file (This saves the
settings)

----
73,
Mike Cizek W0VTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Jim Pyle
Sent: Friday, 28 October, 2022 08:29
To: DX4WIN Reflector <dx4win at mailman.qth.net>
Subject: [Dx4win] Moving logs to DX4WIN & opening a packet cluster window

I would like any information that provides directions to convert MacLogger
DX (MLDX) logs to a format that can be read by DX4WIN..  I have about
50,000 QSOs I'd really like to bring in.

How do I create an adi file that contains all the data, not just the
condensed type sent to ARRL?

I'm also very interested in the steps to open a packet cluster window in
DX4WIN.  Can anyone help me with this?  I had it open once but must admit I
don't know how I opened it.  It was fully functional in that clicking on a
spot moved it to the QSO field.

I've only  had the program installed for about a week and a lot of it has
yet to be tried.

Jim, AA8OY
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html