[Dx4win] DX4WIN Digest, Vol 222, Issue 1
Donn Taylor
k0qc at msn.com
Sun Oct 9 20:30:27 EDT 2022
To import the LOTW confirmed QSOs into DX4WIN, log in to LOTW and select your QSOs. On the left side there is a tab that is download report. Select that and LOTW will generate a file that you can then import in to DX4WIN.
Donn K0QC
Patriotism is supporting your country all the time, and your government when it deserves it. Mark Twain
________________________________
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> on behalf of dx4win-request at mailman.qth.net <dx4win-request at mailman.qth.net>
Sent: Sunday, October 9, 2022 9:35 PM
To: dx4win at mailman.qth.net <dx4win at mailman.qth.net>
Subject: DX4WIN Digest, Vol 222, Issue 1
Send DX4WIN mailing list submissions to
dx4win at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-request at mailman.qth.net
You can reach the person managing the list at
dx4win-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of DX4WIN digest..."
Today's Topics:
1. Re: Trouble getting Icom 7610 recognized (Kostas SV1DPI)
2. HOW DOES ONE TAKE LOTW CONFIRMED LOG FILES AND UPDATE IT INTO
DX4WIN? (DaveK)
3. Re: HOW DOES ONE TAKE LOTW CONFIRMED LOG FILES AND UPDATE IT
INTO DX4WIN? (Mike Cizek W0VTT)
4. Operating from two QTH. (Luciano de la Rosa)
5. FW: Operating from two QTH. (David Perry, N4QS)
----------------------------------------------------------------------
Message: 1
Date: Wed, 28 Sep 2022 21:36:44 +0300
From: Kostas SV1DPI <sv1dpi2 at gmail.com>
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Trouble getting Icom 7610 recognized
Message-ID: <48218302-39c9-68fd-931c-2bc05a1d1838 at gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
I have not an icom, but I read the manual for a while. I see that
default for CI-V baud rate is auto. Or maybe you need to see CI-V USB
baud rate which is also auto. Try have the same with your settings in
one of them. The decode baud rate which is 9600 by default, probably is
something other
73 Kostas SV1DPI
???? 26/9/2022 16:36, ?/? kq3f at comcast.net ??????:
> Hello all!
>
>
>
> Somehow DX4Win is no longer recognizing my Icom 7610, which it used to do
> with no problem. Oddly, N1MM+ recognizes it just fine. Even more oddly, I
> have an Icom 7600 as a second radio and DX4Win recognizes that one as well.
>
>
>
> Here are my settings:
>
>
>
> Type: ICOM 7610_500Hz-V7
>
> Address: 98H
>
> Baud: 9600
>
> COM Port: COM5 (same as N1MM+)
>
> Poll rate: 5000
>
> DTR/RTS both NOT checked
>
>
>
> I have similar settings for the Icom 7600 only 7AH for the address and COM3.
> Works fine. So I'm stumped.
>
>
>
> Any idea welcome. It must be something simple (and dumb, on my part).
> Thanks!
>
>
>
> 73, Joe KQ3F
>
>
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home:http://mailman.qth.net/mailman/listinfo/dx4win
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:DX4WIN at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
------------------------------
Message: 2
Date: Wed, 5 Oct 2022 12:30:48 -0400
From: DaveK <dklim at crosslink.net>
To: dx4win at mailman.qth.net
Subject: [Dx4win] HOW DOES ONE TAKE LOTW CONFIRMED LOG FILES AND
UPDATE IT INTO DX4WIN?
Message-ID: <4868a238-0e55-0edd-1f9a-36e58d12aa3d at crosslink.net>
Content-Type: text/plain; charset=UTF-8; format=flowed
Hello all,
When using? FT8, I send the ADI file to LOTW and also load in the file
into? DX4WIN where DX4WIN shows a country QSO as WORKED.
Since nothing is obvious on LOTW, I cannot figure out how to take my
current LOTW confirmed log and import it into DX4WIN to show digital
QSOs as confirmed.
Any help please,
73 Dave W4JVN
------------------------------
Message: 3
Date: Wed, 5 Oct 2022 11:37:35 -0500
From: "Mike Cizek W0VTT" <mgcizek at gmail.com>
To: "'DaveK'" <dklim at crosslink.net>, <dx4win at mailman.qth.net>
Subject: Re: [Dx4win] HOW DOES ONE TAKE LOTW CONFIRMED LOG FILES AND
UPDATE IT INTO DX4WIN?
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Hello Dave.
Log into your LoTW account and go to the Your QSOs tab.
Click on Download Report (on the far left).
Save this file somewhere convenient.
In the QSO window in DX4WIN, LoTW tab, click on Confirm LoTW using ADIF file.
Done.
Don't enter any dates. Both DX4WIN and LoTW keep track of what you have uploaded and downloaded before. When you upload to LoTW, it is best to import the ADIF from WSJT into DX4WIN and use the Export to LoTW function up upload everything. This way, DX4WIN can keep track of what you have uploaded and when it was uploaded.
----
73,
Mike Cizek W0VTT
-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of DaveK
Sent: Wednesday, 5 October, 2022 11:31
To: dx4win at mailman.qth.net
Subject: [Dx4win] HOW DOES ONE TAKE LOTW CONFIRMED LOG FILES AND UPDATE IT INTO DX4WIN?
Hello all,
When using FT8, I send the ADI file to LOTW and also load in the file into DX4WIN where DX4WIN shows a country QSO as WORKED.
Since nothing is obvious on LOTW, I cannot figure out how to take my current LOTW confirmed log and import it into DX4WIN to show digital QSOs as confirmed.
Any help please,
73 Dave W4JVN
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
Message: 4
Date: Sun, 9 Oct 2022 20:02:06 +0100
From: Luciano de la Rosa <ea8am.radio at gmail.com>
To: dx4win at mailman.qth.net
Subject: [Dx4win] Operating from two QTH.
Message-ID:
<CALfZ9Ha405momM-vUp5cuuSa_1x2JhoBeexzQ-hAqjnA6=KWqQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hello. I operate from two QTH and I want to prepare QSL showing from
which QTH was made each QSO. Is there a procedure to cofigurate labels
to show the DME (Spanish Munnicipalities Diplome) reference and the
square grid for each QTH? Thanks for any idea.
73 de Luc, EA8AM
------------------------------
Message: 5
Date: Sun, 9 Oct 2022 16:34:52 -0500
From: "David Perry, N4QS" <n4qs at vci.net>
To: <dx4win at mailman.qth.net>
Subject: [Dx4win] FW: Operating from two QTH.
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"
Luc,
There is a way to do this, but it is somewhat complicated and requires
knowledge in how to use some of the advanced user features. Here is a
summary as to how I do it:
1. Create a group for each QTH. Go to Filter tab, Selection. It takes
some time to learn how to create and save the groups. Check the help files
or possibly Jim's website AD1C to learn how.
2. Import contacts from each QTH and select the correct group or change
existing QSOs via the Multiple QSO operation under the QSO tab. This is
tricky but can be done.
3. Once you have all QSOs assigned to the correct groups, you can now print
labels. Here is how I do it:
a. Go to File, Preferences, Rep/Lab tab at the bottom.
b. Change the Greeting line to add your grid and Spanish DME for
group1. Click on File, Save Changes to exit.
c. Go to filter, selection to select group1
d. Click on QSLs, Print QSL labels. Be sure you select the correct
label. I have created a custom label that includes the greeting line at the
bottom of the label.
e. Print your labels.
You can repeat the process for group 2.
Note that under filter, you can edit the group names. For example, you can
name group 1 to the Home. Group 2 something else.
You might also be able to create a custom label for each group and possibly
print the Grid and DME directly at the bottom of the label, but I have not
tried that. You would have one custom label for group 1 and a different
custom label for group 2. If you can figure out how to create custom labels
for each group, you would not have to change the greeting line manually for
each group (step 3b above).
I hope this helps. These functions are actually fairly simple once you gain
some experience using them.
Buena suerte!
73,
Dave, N4QS
-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Luciano de la Rosa
Sent: Sunday, October 9, 2022 2:02 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Operating from two QTH.
Hello. I operate from two QTH and I want to prepare QSL showing from which
QTH was made each QSO. Is there a procedure to cofigurate labels to show
the DME (Spanish Munnicipalities Diplome) reference and the square grid for
each QTH? Thanks for any idea.
73 de Luc, EA8AM
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
_______________________________________________
DX4WIN mailing list
DX4WIN at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
End of DX4WIN Digest, Vol 222, Issue 1
**************************************
More information about the DX4WIN
mailing list