[Dx4win] VUCC totals not accurate

[Paul van der Eijk]

David,

You can email your log to me and I will have a look,

--Paul, KK4HD

On Fri, Jul 29, 2022 at 5:03 PM David Perry, N4QS <n4qs at vci.net> wrote:

> Mike,
>
> Thanks for suggestion, but that did not fix the problem.  No matter how I
> set the award flags under the VUCC tab, a confirmed CW contact with AB0S in
> EM09 shows W in the VUCC window and on the VUCC report listing.  Can anyone
> else see what I am talking about?
>
> Thank you.  73,  Dave, N4QS
>
>
>
> -----Original Message-----
> From: Mike Cizek W0VTT <mgcizek at gmail.com>
> Sent: Friday, July 29, 2022 3:30 PM
> To: 'David Perry, N4QS' <n4qs at vci.net>; dx4win at mailman.qth.net
> Subject: RE: [Dx4win] VUCC totals not accurate
>
> Hello Dave,
>
> There is one more place to check.  Starting with the menu bar up at the
> top:
> File > Awards > VUCC Grid
> Make sure you have the proper boxes checked under Confirmation, Mode group,
> Valid modes, Valid bands, and Award bands.  Under Awards, only the Mode box
> should be checked.
>
> ----
> 73,
> Mike Cizek W0VTT
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
> Behalf Of David Perry, N4QS
> Sent: Friday, 29 July, 2022 15:04
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] VUCC totals not accurate
>
> After all these years, I am just starting to focus on VUCC and FFMA awards
> for six meters.  For VUCC, my confirmed totals in DX4WIN are about 70 less
> that my totals showing on LOTW.  (I have very few grids confirmed via QSL
> card.)  When I open the VUCC window, it is also apparent that confirmations
> for CW and SSB are not showing as C.  Under Reports, Awards, VUCC tab, I
> have all modes selected.  The same thing happens when I run a VUCC report
> listing - confirmations for CW and SSB on 6 meters do not show up as
> confirmed.
>
>
>
> For example, for EM09 in Kansas, LOTW shows that grid was confirmed with
> AB0S.  When I look up that QSO in DX4WIN, the Confirm LOTW box is set for Y
> - so it is marked as confirmed in DX4WIN.  But in the VUCC window, EM09
> only
> shows a W in the CW and SSB boxes-there should be a C in the CW box.  If I
> double click on the 6 at the top, all of my QSOs with EM09 on 6 meters are
> shown, and AB0S clearly shows that it was confirmed via LOTW.
>
>
>
> So why are these CW and SSB confirmations not showing up in the VUCC window
> and on the VUCC reports?
>
>
>
> 73,
>
>
>
> Dave
>
>
>
> David Perry, N4QS
>
>
>
> 3600 Savoy Circle
>
> Paducah, KY  42001
>
>
>
> n4qs at vci.net <mailto:n4qs at vci.net>
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
~~~~~~~~~~~~~~~~~~~~~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com