[Dx4win] FT4/8 not counting as digital

[John, K9EL]

The boxes to check are not in the Preferences section, but in the Awards section.

Go to File - Awards.

There are tabs for DXCC, WAZ, etc.  If you do not have FT8 and MFSK checked, then FT8/4 QSO’s will not be counted for awards.

73, John K9EL


On Jan 30, 2022, at 5:40 PM, kf2ti at optonline.net wrote:

Good evening John and thanks for the reply

I double checked my preferences

In both the station tab and the packet spotting tab, FT8 & MFSK are checked
In the mode group, SSB/CW#/Digital, all checked


  ------ Original Message ------
  From: k9el at comcast.net
  To: kf2ti at optonline.net
  Sent: Sunday, January 30, 2022 4:01 PM
  Subject: Re: [Dx4win] FT4/8 not counting as digital

        Check File - Awards

Maybe you do not have the FT modes checked.

73, John K9EL


On Jan 30, 2022, at 2:58 PM, kf2ti at optonline.net wrote:


Afternoon everyone,

Have had great success with FT4/8, working many new band/modes and importing into my DX4WIN logbook, HOWEVER, I have noticed that when I enter a qsl card or LOTW contact, DX4WIN does not confirm the contact as a Dogital contact.  RTTY, yes, FT4 or 8, no
Suggestions?

Steve KF2TI
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html