[Dx4win] Question

[Jerry N9AW]

Hi John,
If you want to export specifically in order to submit your QSOs to LOTW
then you will want to use the LOTW | Submit to LOTW pull down menu.  Using
this assumes you will only submit those QSO that have the LOTW Upload flag
set to Y.  Using this method will ensure that if you add QSOs to the log,
then only your added QSOs will be exported to go to LOTW.  And, again, the
criteria for selection are those QSOs that have the LOTW Upload field
marked as Y.  There is a setting in Preferences so that all new QSOs will
automatically be marked with a Y for LOTW upload, so you don't have to mark
them manually.

Hope this helps.  Good luck.

73
Jerry, N9AW


On Sun, Aug 21, 2022 at 7:28 PM John Paul Keon <jpkeon340 at gmail.com> wrote:

> I have asked this before and do not remember how to make the
> conversion.
>
> I have my log files saved from the time I started using the DX4WIN
> program.  They are all saved as DX4WIN (date).DXL
> I am trying to export the logs to LOTW and cannot figure out how I
> switched the files to an ADIF file.
> Can someone send me in the direction of the change.
> I have all the latest updates, and am using the version 9.0.9.1259.
>
> I have read the import filter:DXLog file and that does not seem to help
> me to change the file extension.
>
> If you don't want to post on here you can send me a PM to my email (
> jpkeon340 at gmail.com).
>
> I greatly appreciate any help here.
>
> John Paul // AB4PP
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>