[Dx4win] Transferring Grid Locator

[Mike Cizek W0VTT]

Hello Berkin,

DX4WIN will import the WJ2O log directly.  Have you tried that?  Save a copy
of your existing log first.  Then, from the menu bar at the top:

File > Import/export   Scroll down to Wj2O  (way at the bottom)  Import

See what this does.  If this doesn't work, can you paste a part of the ADIF
file from Wj2O into an email to the reflector?  Just a few QSOs should be
enough, like this:

<QSO_DATE:8:d>20210914 <TIME_ON:6>170905 <CALL:5>HA5JI <FREQ:8>14.02600
<PFX:3>HA5 <DXCC:3>239 <CONT:2>EU <MODE:2>CW <BAND:3>20m <RST_SENT:3>569
<RST_RCVD:3>599 <CQZ:2>15 <GRIDSQUARE:4>JN96 <QSL_RCVD:1>N
<LOTW_QSL_SENT:1>Y
<LOTW_QSLSDATE:8:d>20210929 <COMMENT:30>HSC # 709   op: Gyuri  good op
<NAME:5>Gyuri <NOTES:5>TT539 <EOR>

<QSO_DATE:8:d>20210914 <TIME_ON:6>171625 <CALL:6>IU0HMB <PFX:3>IU0
<DXCC:3>248
<CONT:2>EU <MODE:2>CW <BAND:3>20m <RST_SENT:3>599 <RST_RCVD:3>599 <CQZ:2>15
<QSL_RCVD:1>N <LOTW_QSL_SENT:1>Y <LOTW_QSLSDATE:8:d>20210929 <NAME:5>Vlado
<NOTES:5>TT539 <QTH:8>Tuscania <EOR>

----
73,
Mike Cizek W0VTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Berkin AYDOGMUS, TA3J
Sent: Wednesday, 29 September, 2021 13:59
To: 'DX4WIN Reflector' <dx4win at mailman.qth.net>
Subject: Re: [Dx4win] Transferring Grid Locator

Dear Friends,

Here are the problems I face in DX4WIN when I transfer with ADIF format:

1. I cannot get the information about state, county, grid locator, IOTA and
DIG in DX4WIN.

2. In "Membership" I get E, EL, ELQ and L information.

3. In some QSO, there is "QSL date" information in others it is not present,
and "QSL date" is present.

4. In "Notes for this QSO" power information in present. What can I do in
prevent this?

I can send the log visions to friend interested in this.

Thanks for help.

73,

Berkin AYDOGMUS, TA3J

---

-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu]
Sent: Tuesday, September 28, 2021 6:36 PM
To: Berkin AYDOGMUS, TA3J
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Transferring Grid Locator

On Tue, Sep 28, 2021 at 9:31 AM Berkin AYDOGMUS, TA3J wrote:

> When I am transferring from my old log program WJ20 to the new DX4WIN
> (9.0.0.1259) program I can transfer only the QSO information. What 
> should I do to transfer Grid Locators?

If you export ADIF from your old program and import ADIF into DX4WIN, the
gride locators should transfer automatically.  If it doesn't work, post the
results here.

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html