[Dx4win] Export filters

[Christian Janssen DL1MGB]

In parallel, when trying to edit a new filter, the version 9.09 filter edit seems to be a bit buggy.

When entering a callsign with position 1 and length 20, it creates the callsign starting with column 2. There is no way to start at 1. OK, let's start at 2. Then entering the band, starting at 23, length 3. When clikcing insert, band starts at 24 because the start of callsign was shifted to 3. Guess what when entering time...yes time starts not at 39, but at 40 and all the above field were shifted +1.

and so on and so on...

Unfortunately, not useable. Or do I have to do anything to get it working? I normally assume that the software is not buggy, but I am too stupid to use it :-)

73s Chris DL1MGB



Am 04.09.2021 um 11:32 schrieb Christian Janssen DL1MGB:
> Hello again,
> 
> in a very old backup, I found a NDR file which I created when printing the filter. Can I use this anyhow to get my filter running again?
> 
> 73s Chris DL1MGB
> 
> 
> 
> Am 04.09.2021 um 10:01 schrieb Christian Janssen DL1MGB:
>> Hi all,
>>
>> it also seems that my export filters are gone after the last update to 9.09. Is it just my fault I didn't follow any backup procedure or is there anything else I can do to get them back?
>>
>> 73s Chris DL1MGB
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>