[Dx4win] QO-100 and Q65

[ON4AOI]

Tibor,
That works also since LoTW doesn't check for up and down band 
but your log on LoTW remains not correct because 
You will have both Band and Rx band = 3cm and should be 13cm and 3cm

Guy ON4AOI  

-----Original Message-----
From: Tibor M. Blum - IK2SAI - <tibor.blum at tiscali.it> 
Sent: Thursday, October 28, 2021 2:28 PM
To: 'ON4AOI' <on4aoi at skynet.be>; F4KMA at orange.fr; 'DX4WIN Refelector'
<dx4win at mailman.qth.net>
Subject: R: [Dx4win] QO-100 and Q65

Hi guys.
I am quite active on QO100 since may, this year.
Uptoday i made some 230 QSO logging them with my  DX4WIN.
I must say that I uploaded my log to LOTW and downloaded reports with
confirmations.
All is ok for me.
My experience is different  of what has been advised by Guy.
I log my QSO100 QSO in this way:
Band: SAT
Mode: SSB Sub Mode SSB (or the mode performed) Sat name: QO-100 Sat
mode:Other.
My IC9700 is not cat controlled so Freq (khz) in the input qso window remain
blanck.
In this way I log my QSO and I receive confirmations via LOTW.
I do not manually edit the file that has to be upload to LOTW.

Regards, 73 de Tibor, IK2SAI



-----Messaggio originale-----
Da: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> Per
conto di ON4AOI
Inviato: giovedì 28 ottobre 2021 14:13
A: F4KMA at orange.fr; 'DX4WIN Refelector' <dx4win at mailman.qth.net>
Oggetto: Re: [Dx4win] QO-100 and Q65

Hi,
Here is how I do it and below also for Q65 qso's

Example 

Log "call:xxxxxx"  with Band = SAT ==> this has been always the case for SAT
qso's Sat Name = QO-100 Sat Mode = other With cat connected your freq ~
2400.890

To upload on LoTW or any other logtracker You need to edit first your
exportname.ADI

Do a search after <BAND:3>3cm and replace it with <BAND:4>13cm Save the
*.adi and upload 

For Q65 qso's I log Mode = MFSK  and Submode - JS8 (can be any other submode
that you don't need)

To upload on LoTW or any other logtracker You need to edit first your
exportname.ADI Do a search after SUBMODE:3>JS8 and replace it with
SUBMODE:3>Q65 Save the *.adi and upload
 
That's it

Guy ON4AOI -OT7K
 


-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of RCSEG
Sent: Thursday, October 28, 2021 10:05 AM
To: DX4WIN Refelector <dx4win at mailman.qth.net>
Subject: [Dx4win] QO-100

Good day
How can we log QO-100 QSO,on DX4Win ?
I see 13cm for the band, QO-100 for the sat name, but not the correct mode.
Any update soon about this please ?

73
F4KMA
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html