[Dx4win] Kenwood TS-480SAT Configure

Kostas SV1DPI sv1dpi2 at gmail.com
Tue Feb 9 12:02:21 EST 2021


Hello Tony

Kenwood has not address.

Be careful that you have in Kenwood menu 56 the same baud rate as in 
dx4win. The default is 9600

Also try different settings checking or unchecking dtr and rts in 
dx4win. Try if dtr checked and rts unchecked works for you.

I had a 480 and was working with dx4win without a problem.

73 Kostas SV1DPI

Στις 9/2/2021 03:11, ο/η Tony Zinnanti έγραψε:
> Hello All,
>
> I am trying to get DX4WIN to speak to my Kenwood TS-480 SAT without success. I get a timed-out message.
>
> I'm on COM port 6. Baud rates are matched (9,600 radio and DX4Win). No conflicts in accessing the port known. WSJT-X communicates fine with the radio on COM 6. I believe Kenwood does not use a hex address, but I don't know definitively. The setting is at "default" (00). The system is a generic PC running updated Windows 10.
>
> Any help is much appreciated.
>
> Thanks -
>
> Tony
>
>
> Tony Zinnanti - K6RXG
> 9250 Thompson Avenue
> Chatsworth, CA 91311
> Tel/Txt: (661) 312-8734
> k6rxg at outlook.com<mailto:k6rxg at outlook.com>
> Lat: 34.1713615
> Long: -118.6067508
> Grid: CM14
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the DX4WIN mailing list