[Dx4win] Only One QSL Label Prints

[Mike Cizek W0VTT]

Hello Joel,

Please check to see if you have cleared any filters before printing.  If you
do your QSLs the same way I do, going through a string of cards with F8
(search) and F2 (mark for printing), and then go to print, you still have
the filter for that last QSO and that's the only one that will print.  Clear
the filters, and then print.  Don't ask me how many times I have learned
this same thing, over and over!


--
73,
Mike Cizek W0VTT 

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of w5zn at w5zn.org
Sent: Monday, February 01, 2021 14:24
To: dx4win at mailman.qth.net
Subject: [Dx4win] Only One QSL Label Prints

I need some assistance with a QSL label printing issue I can't resolve.
This started some time ago but I'm not exactly sure whether it was after
a program upgrade 9.0 or something else, and this may not be a DX4Win
issue. 

When I go to print QSL labels the print window appears and at the top of
that window it will correctly identify how many labels are to be
printed, however when I select "Print" only one of the labels in the que
will print and no others. The only way around this is to mark each QSO
label to be printed with a "Y" in the QSO window one at a time. 

The labels print fine, I just can't seem to get more than one to print.
What am I missing? Any suggestions? 

73 Joel W5ZN
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html