[Dx4win] CW Parameters

[Jim Reisert AD1C]

> Hi Hi, I have connected my FT-991A by USB cable to my laptop. I use the COM
> 5 Enhanced port from Silicon Labs, Baud Rate 38400 and everything is
> perfect when changing frequency or mode. Can someone help me and tell me
> how I should configure in Setup Parameters / CW to be able to use the macro
> keys on TX? Thank you.

Hola Luc,

I do not think you can do what you want with just one cable.  I
believe that you will need a separate COM port (could be a virtual
port with a USB cable) and a CW keying interface connected to the CW
Key input of the FT-991.  Something like this (there must be less
expensive options out there):

    https://hamcrafters2.com/WKUSBX.html

DX4WIN does not support sending CAT commands to the FT-991A in order to send CW.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us