[Dx4win] Rigfiles, rigfiles and more about rigfiles

[ON4AOI]

Correct Joe,
Copy & paste had 115200 baud instead of equal baudrate  

Guy

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Joe Subich, W4TV
Sent: Wednesday, April 21, 2021 4:23 PM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Rigfiles, rigfiles and more about rigfiles


On 2021-04-21 9:35 AM, ON4AOI wrote:
 >
> Or you have or buy a microHAM device that creates 2 CAT ports and can 
> use one @ 38400 baud for dx4win and the other @ 115200 baud for wsjtx 
> >

The two CAT ports for microHAM "keyers" (microHAM USB Device Router) must be
set to the same rate.  The maximum baud rate supported by microHAM is 57,600
bps (TenTec Orion/Orion II/Omni VII).

If one needs waterfall/panadapter data from the transceiver (Icom), use the
transceiver USB connection for waterfall/panadapter and the CI-V connection
for the microHAM keyer (CAT connection).  Details are in the "Transceiver
Settings" section of the Support area at www.microHAM.com.

73,

    ... Joe, W4TV


On 2021-04-21 9:35 AM, ON4AOI wrote:
> Hi All,
> 
>   
> 
> Before some start to argue about rigdrivers that doesn't work when you 
> use
> 
> the USB connection with DX4WIN  is "BULLSHIT"
> 
> It works perfect when you use the correct settings.
> 
> I have made so many drivers even that I don't own all the rigs.
> 
> First of all read this document and follow the procedure:
> 
>   
> 
> https://www.kkn.net/~n6tv/N6TV_Dayton_2020_Everything_USB.pdf
> 
>   
> 
> Kenwood, Yaesu and Icom (nearly all ways) installs  2 serial ports.
> 
> You need to use the correct one for CAT communication check your 
> manual how to.
> 
> In your Radio setup @ DX4WIN you will see that the max baudrate is
> 
> 38400 for Yaesu,
> 
> 19200 for Icom, limit by icom
> 
> 57600 for Kenwood
> 
>   
> 
> Let me assure you that for the data we need 38400 baud is already
overkill.
> 
> So if you use only USB connection set the baudrate for this port also 
> on what you see in DX4WIN
> 
> Higher want work......
> 
> The reason there USB serial ports are set to 115200 is when you use 
> the waterfall via there programs
> 
> Then you need that speed.
> 
> How about wsjt-x you may wonder how to fix that.
> 
> Or you have or buy a microHAM device that creates 2 CAT ports and can 
> use one @ 38400 baud for dx4win and the other @ 115200 baud for wsjtx
> 
> Or you also connect the serial port from the rig (if still available)  
> to your computer you can use this one for Dx4win and use the USB for
WSJTX.
> 
>   
> 
> In the meantime I wrote also the FTDX10 rig file for test, if anyone 
> needs for test pse ask for it
> 
>   
> 
>   
> 
> Guy ON4AOI - OT7K
> 
>   


______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html