From azulvivo at gmail.com  Tue Sep  1 04:33:14 2020
From: azulvivo at gmail.com (azulvivo)
Date: Tue, 1 Sep 2020 08:33:14 +0000
Subject: [Dx4win] Obrido Jim Reisert AD1C
Message-ID: <CAJwZ58cd=dhC_bF259-BJUxUYmvkV7sALEo_8ume0=aUZEALXA@mail.gmail.com>

Good morning Jim Reisert AD1C, thank you for everything you have done for
DX4Win, I know you have had a lot of work, may God help you and give you
lots of luck. very obliged
CU3BL Manuel de Oliveira
PS excuse my English

From goofyham at rochester.rr.com  Tue Sep  1 09:38:56 2020
From: goofyham at rochester.rr.com (George)
Date: Tue, 1 Sep 2020 09:38:56 -0400
Subject: [Dx4win] lost FT8
Message-ID: <001501d68065$3d83d330$b88b7990$@rochester.rr.com>

I lost FT8 as one of the logging options when logging a contact?
It was OK yesterday but not now.
I have FT8 checked in my station parameters.

Any help?
Thanks

George  K  W2YJ



From goofyham at rochester.rr.com  Tue Sep  1 12:35:42 2020
From: goofyham at rochester.rr.com (George)
Date: Tue, 1 Sep 2020 12:35:42 -0400
Subject: [Dx4win] no FT8 solved
Message-ID: <000f01d6807d$ef75f240$ce61d6c0$@rochester.rr.com>

I wasn't' s looking at the upper end of the mode selections when logging a
QSO but rather moving down to the F8 selections.
The FT8 was in the upper part of the selections apparently because that's
what I choose most often?
Thanks to everyone that responded to my problem which was me, the problem,
not DX4WIN.
No problem with DX4WIN.

George  K  W2YJ





From jjreisert at alum.mit.edu  Tue Sep  1 19:15:11 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Tue, 01 Sep 2020 17:15:11 -0600
Subject: [Dx4win] DX4WIN.CTY country file Release #20.15 - 01 September 2020
Message-ID: <mailman.281.1599002135.3112.dx4win@mailman.qth.net>

The DX4WIN country file, DX4WIN.CTY Release #20.15 is now available from:

    http://www.country-files.com/dx4win-info/

You can read the release notes at:

    http://www.country-files.com/dx4win-cty-20.15-01-september-2020/

DX4WIN 9 users should use Help | Check for Updates from the main menu.
Note that there may be a delay between this announcement and when the
updated country file is actually available.

Users of older versions of DX4WIN should use the DX4WIN Data Updater:

    https://dx4win.ad1c.us/updater/

Please inform me of any corrections.

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us




From canaryluc at gmail.com  Thu Sep  3 04:35:03 2020
From: canaryluc at gmail.com (Luc)
Date: Thu, 3 Sep 2020 09:35:03 +0100
Subject: [Dx4win] Fatal error
Message-ID: <CAMv0fY9FCW6dOiMS4fj6aNiZs62bMj4rTDGUmrDPMX0PBLVVhg@mail.gmail.com>

Hi.
I use version 8.05 of DX4WIN.
I know that for version 9 the DX4WIN DATA UPDATER updater is not needed.
I have always used the updater and have never had any problems, but now
with DX4WIN DATA UPDATER Ver 9.5, when I open my DX4WIN 8.05, it gives me
several errors:

- Undefined entity reference 'mdash'
line 3
<title> 404 & mdash, not found </title>


- Access violation at address 0063FE4C in module 'dx4win.exe'
Read address 00000000

- A fatal error occured reading the logfile

Any suggestion?

How can I solve this problem?


Regards.

EA8AM

-- 
Si reenv?a este correo, es OBLIGACI?N LEGAL seg?n la "Agencia Espa?ola de
Protecci?n de Datos de Car?cter Personal" proteger la intimidad de sus
contactos, para ello y para evitar SPAM (correo no deseado) hay que seguir
los siguientes pasos:

1.- Borre la direcci?n del remitente y cualquier otra direcci?n que
aparezca en el cuerpo del mensaje.

2.- Introduzca los destinatarios en el apartado CCO (CON COPIA OCULTA)

Recuerde:

Para: D?jelo en blanco.

Ccc: D?jelo en blanco.

Cco: Incluya aqu? a sus destinatarios.

Coloque esta nota en sus mensajes.

GRACIAS POR COLABORAR.

From jjreisert at alum.mit.edu  Thu Sep  3 12:30:15 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Thu, 3 Sep 2020 10:30:15 -0600
Subject: [Dx4win] Fatal error
In-Reply-To: <CAMv0fY9FCW6dOiMS4fj6aNiZs62bMj4rTDGUmrDPMX0PBLVVhg@mail.gmail.com>
References: <CAMv0fY9FCW6dOiMS4fj6aNiZs62bMj4rTDGUmrDPMX0PBLVVhg@mail.gmail.com>
Message-ID: <CAK-n8j7Tg=TzU7isMfzuKBXyvetM9wOaV8hrRWj87_37hUHFqw@mail.gmail.com>

> I use version 8.05 of DX4WIN.
> I know that for version 9 the DX4WIN DATA UPDATER updater is not needed.
> I have always used the updater and have never had any problems, but now
> with DX4WIN DATA UPDATER Ver 9.5, when I open my DX4WIN 8.05, it gives me
> several errors:
>
> - Undefined entity reference 'mdash'
> line 3
> <title> 404 & mdash, not found </title>
>
>
> - Access violation at address 0063FE4C in module 'dx4win.exe'
> Read address 00000000
>
> - A fatal error occured reading the logfile


Luc let me access his system remotely.  His fulllist.xml file was
corrupt.  This is the file that has the island names for each IOTA
group.  The file does not exist anymore, so if you try to update it,
you will get a corrupt file.

The latest version of the Updater (9.5) does not let you select this
file for update (the menu choice is grayed out), but if you use an
older version, you could do this.

This file has not been updated for some time. When the new IOTA World
website was created, they provide the island names in a different
format (JSON, not XML).  I do not have time to try to convert the JSON
file back to XML format for DX4WIN 8.0x users.  If you are an active
IOTA chaser, you are much better off with DX4WIN 9.0x.

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From nborghetti1 at gmail.com  Mon Sep  7 00:15:48 2020
From: nborghetti1 at gmail.com (Natale Borghetti)
Date: Mon, 7 Sep 2020 06:15:48 +0200
Subject: [Dx4win] Corrupt members
Message-ID: <c3996fa6-d548-74ad-08b3-9878397ceafd@alice.it>

With the last update "Various membership list for packet"

My membership disappear, some thing get corrupted.

win7pro e dx4win 9.0.9.1259

This happens to some one else ???

Thanks for advice and help

-- 
Natale Borghetti

I5NPH

nborghetti at alice.it


-- 
Questa email ? stata esaminata alla ricerca di virus da AVG.
http://www.avg.com


From jjreisert at alum.mit.edu  Mon Sep  7 09:19:12 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Mon, 7 Sep 2020 07:19:12 -0600
Subject: [Dx4win] Corrupt members
In-Reply-To: <c3996fa6-d548-74ad-08b3-9878397ceafd@alice.it>
References: <c3996fa6-d548-74ad-08b3-9878397ceafd@alice.it>
Message-ID: <CAK-n8j7RPMEFSE76s0QXv+iJPusABCzOtV65JudeT+BVS9E7CA@mail.gmail.com>

Exit DX4WIN.  Download this file to your dx4w903\SAVE directory:

http://dx4win.ad1c.us/members/members.dat

See if it fixes the problem.

On Sun, Sep 6, 2020 at 10:17 PM Natale Borghetti <nborghetti1 at gmail.com> wrote:
>
> With the last update "Various membership list for packet"
>
> My membership disappear, some thing get corrupted.
>
> win7pro e dx4win 9.0.9.1259
>
> This happens to some one else ???
>
> Thanks for advice and help
>
> --
> Natale Borghetti
>
> I5NPH
>
> nborghetti at alice.it
>
>
> --
> Questa email ? stata esaminata alla ricerca di virus da AVG.
> http://www.avg.com
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From jjreisert at alum.mit.edu  Mon Sep  7 09:22:00 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Mon, 7 Sep 2020 07:22:00 -0600
Subject: [Dx4win] Corrupt members
In-Reply-To: <CAK-n8j7RPMEFSE76s0QXv+iJPusABCzOtV65JudeT+BVS9E7CA@mail.gmail.com>
References: <c3996fa6-d548-74ad-08b3-9878397ceafd@alice.it>
	<CAK-n8j7RPMEFSE76s0QXv+iJPusABCzOtV65JudeT+BVS9E7CA@mail.gmail.com>
Message-ID: <CAK-n8j7u43BxxQGsrnVfoUU9CEs5nr3h4Eak=SiAneO2P06eDA@mail.gmail.com>

There is something wrong with the membership list.  I will try to find
out what is wrong later today.

Thanks for letting us know.

73 - Jim AD1C

On Mon, Sep 7, 2020 at 7:19 AM Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:
>
> Exit DX4WIN.  Download this file to your dx4w903\SAVE directory:
>
> http://dx4win.ad1c.us/members/members.dat
>
> See if it fixes the problem.
>
> On Sun, Sep 6, 2020 at 10:17 PM Natale Borghetti <nborghetti1 at gmail.com> wrote:
> >
> > With the last update "Various membership list for packet"
> >
> > My membership disappear, some thing get corrupted.
> >
> > win7pro e dx4win 9.0.9.1259
> >
> > This happens to some one else ???
> >
> > Thanks for advice and help
> >
> > --
> > Natale Borghetti
> >
> > I5NPH
> >
> > nborghetti at alice.it
> >
> >
> > --
> > Questa email ? stata esaminata alla ricerca di virus da AVG.
> > http://www.avg.com
> >
> > ______________________________________________________________
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From jjreisert at alum.mit.edu  Mon Sep  7 09:26:06 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Mon, 7 Sep 2020 07:26:06 -0600
Subject: [Dx4win] Corrupt members
In-Reply-To: <CAK-n8j7u43BxxQGsrnVfoUU9CEs5nr3h4Eak=SiAneO2P06eDA@mail.gmail.com>
References: <c3996fa6-d548-74ad-08b3-9878397ceafd@alice.it>
	<CAK-n8j7RPMEFSE76s0QXv+iJPusABCzOtV65JudeT+BVS9E7CA@mail.gmail.com>
	<CAK-n8j7u43BxxQGsrnVfoUU9CEs5nr3h4Eak=SiAneO2P06eDA@mail.gmail.com>
Message-ID: <CAK-n8j6PMxhkVkV1HoHeZA_nd_FrwCOWK2Pi4bV5xeF-BBSW2A@mail.gmail.com>

If you are having problems, you can download this file to your DX4WIN
9.0x SAVE directory:

http://dx4win.ad1c.us/members/members.dat

This is the list that was created a week ago, on August 29.

Paul, can you please update the file on the server until I can fix the problem?

73 - Jim AD1C

On Mon, Sep 7, 2020 at 7:22 AM Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:
>
> There is something wrong with the membership list.  I will try to find
> out what is wrong later today.
>
> Thanks for letting us know.
>
> 73 - Jim AD1C
>
> On Mon, Sep 7, 2020 at 7:19 AM Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:
> >
> > Exit DX4WIN.  Download this file to your dx4w903\SAVE directory:
> >
> > http://dx4win.ad1c.us/members/members.dat
> >
> > See if it fixes the problem.
> >
> > On Sun, Sep 6, 2020 at 10:17 PM Natale Borghetti <nborghetti1 at gmail.com> wrote:
> > >
> > > With the last update "Various membership list for packet"
> > >
> > > My membership disappear, some thing get corrupted.
> > >
> > > win7pro e dx4win 9.0.9.1259
> > >
> > > This happens to some one else ???
> > >
> > > Thanks for advice and help
> > >
> > > --
> > > Natale Borghetti
> > >
> > > I5NPH
> > >
> > > nborghetti at alice.it
> > >
> > >
> > > --
> > > Questa email ? stata esaminata alla ricerca di virus da AVG.
> > > http://www.avg.com
> > >
> > > ______________________________________________________________
> > > DX4WIN mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:DX4WIN at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
> >
> > --
> > Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us
>
>
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From azulvivo at gmail.com  Wed Sep  9 07:25:53 2020
From: azulvivo at gmail.com (azulvivo)
Date: Wed, 9 Sep 2020 11:25:53 -0000
Subject: [Dx4win] FT-891 CONECT DX$WIN?
Message-ID: <004501d6869b$fb5b3600$f211a200$@gmail.com>

Greetings

I'm going to buy an FT-891 radio, I ask if it works with DX4WIN 9.0.9.1259,
I ask for help.

thank you very much

CU3BL Manuel de Oliveira


From wd4ngb at charter.net  Wed Sep 16 09:18:32 2020
From: wd4ngb at charter.net (wd4ngb)
Date: Wed, 16 Sep 2020 08:18:32 -0500
Subject: [Dx4win] DX4WIN and FT8
Message-ID: <ba8f3e66-75c0-b9ed-9d29-fd35c99b1294@charter.net>

I have been using DX4WIN since 98, and love it. I am using 8.05, since 
9.x did not really offer anything that was of interest to me at the time.

I recently purchased a new TS890S, and love all the features it has, 
plus better for digital modes. I have been active on RTTY for decades, 
and with all the hype about the newer digital modes, decided to test the 
waters with FT8. It does do a good job a weak signal communications, and 
seems to be popular with many DX-Peditions.

I read over some of the prior archives, and from what I can make out, 
9.x does not support it, other than allowing some merging of logs from 
some FT8 apps, into DX4WIN. Since FT8 and FT4 are so popular, and 
growing, is there any plans to incorporate it into DX4WIN, similar to 
MMTTY? If so, I will place my Pre-Order now. :)

If not, I guess I can do a Log Merge once a week.

Bruce WD4NGB (No Good Bum)



From wd4ngb at charter.net  Fri Sep 18 21:25:34 2020
From: wd4ngb at charter.net (wd4ngb)
Date: Fri, 18 Sep 2020 20:25:34 -0500
Subject: [Dx4win] Odd Update with 9.3
Message-ID: <8a08d9d8-b112-d6dc-db10-5a238622679c@charter.net>

I went ahead and upgraded my 8.05 to 9.3. I installed it, and got it 
going fine. Merged my new FT8 log into it fine. I am planing on 
participating in the RTTY Contest this weekend, so decided to try the 
update app in it. When I use the update, it did a lot of things, and 
when completed, my 9.3 is now 9.0.9.1259.

Should I re-download 9.3?

Bruce WD4NGB

From jimk0xu at gmail.com  Fri Sep 18 22:01:09 2020
From: jimk0xu at gmail.com (Jim Rhodes)
Date: Fri, 18 Sep 2020 21:01:09 -0500
Subject: [Dx4win] Odd Update with 9.3
In-Reply-To: <8a08d9d8-b112-d6dc-db10-5a238622679c@charter.net>
References: <8a08d9d8-b112-d6dc-db10-5a238622679c@charter.net>
Message-ID: <CALhxr4aUY9yz_JRKWGGRKrpWqyZcHLRPRJArdPXFak6gjRODQg@mail.gmail.com>

I just ran the update and was taken from 9.0.3 to 9.0.9.1259. I think you
were probably at 9.0.3 before the update.

On Fri, Sep 18, 2020, 20:25 wd4ngb <wd4ngb at charter.net> wrote:

> I went ahead and upgraded my 8.05 to 9.3. I installed it, and got it
> going fine. Merged my new FT8 log into it fine. I am planing on
> participating in the RTTY Contest this weekend, so decided to try the
> update app in it. When I use the update, it did a lot of things, and
> when completed, my 9.3 is now 9.0.9.1259.
>
> Should I re-download 9.3?
>
> Bruce WD4NGB
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

From wd4ngb at charter.net  Fri Sep 18 22:27:11 2020
From: wd4ngb at charter.net (wd4ngb)
Date: Fri, 18 Sep 2020 21:27:11 -0500
Subject: [Dx4win] Odd Update with 9.3
In-Reply-To: <CALhxr4aUY9yz_JRKWGGRKrpWqyZcHLRPRJArdPXFak6gjRODQg@mail.gmail.com>
References: <8a08d9d8-b112-d6dc-db10-5a238622679c@charter.net>
	<CALhxr4aUY9yz_JRKWGGRKrpWqyZcHLRPRJArdPXFak6gjRODQg@mail.gmail.com>
Message-ID: <51464d79-6754-7517-bcfd-d674b34b2780@charter.net>

It has been a hectic week. You are correct.
I feel like a idiot now. Nothing else needed. :)


Thanks....


On 9/18/2020 9:01 PM, Jim Rhodes wrote:
> I just ran the update and was taken from 9.0.3 to 9.0.9.1259. I think 
> you were probably at 9.0.3 before the update.
> 
> On Fri, Sep 18, 2020, 20:25 wd4ngb <wd4ngb at charter.net 
> <mailto:wd4ngb at charter.net>> wrote:
> 
>     I went ahead and upgraded my 8.05 to 9.3. I installed it, and got it
>     going fine. Merged my new FT8 log into it fine. I am planing on
>     participating in the RTTY Contest this weekend, so decided to try the
>     update app in it. When I use the update, it did a lot of things, and
>     when completed, my 9.3 is now 9.0.9.1259.
> 
>     Should I re-download 9.3?
> 
>     Bruce WD4NGB
>     ______________________________________________________________
>     DX4WIN mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/dx4win
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:DX4WIN at mailman.qth.net <mailto:DX4WIN at mailman.qth.net>
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
> 

From chris at dl1mgb.com  Sat Sep 19 02:42:27 2020
From: chris at dl1mgb.com (Christian Janssen)
Date: Sat, 19 Sep 2020 08:42:27 +0200
Subject: [Dx4win] Filter settings V8 > V9
Message-ID: <3a95da9f-e854-f85e-fb0d-a24f5d66009d@dl1mgb.com>

Hi,

I am pretty new to Version 9 after several years staying with V8. Is there a chance to copy the filter settings I created over the years from Version 8 to Version 9?

73s Chris DL1MGB

From jjreisert at alum.mit.edu  Sun Sep 20 20:51:48 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Sun, 20 Sep 2020 18:51:48 -0600
Subject: [Dx4win] Filter settings V8 > V9
In-Reply-To: <3a95da9f-e854-f85e-fb0d-a24f5d66009d@dl1mgb.com>
References: <3a95da9f-e854-f85e-fb0d-a24f5d66009d@dl1mgb.com>
Message-ID: <CAK-n8j6Eah35t8XNXT7oRag9TNU0D2XrctsBS1ThZFFk-hW6bQ@mail.gmail.com>

On Sat, Sep 19, 2020 at 12:43 AM Chris DL1MGB wrote:

> I am pretty new to Version 9 after several years staying with V8. Is there a chance to copy the filter settings I created over the years from Version 8 to Version 9?

Filter settings should be stored in your logbook (.DXL file).  So if
you copied your logbook file from the V8 to the V9 "SAVE" directory,
you should have them.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From chris at dl1mgb.com  Mon Sep 21 00:28:10 2020
From: chris at dl1mgb.com (Christian Janssen)
Date: Mon, 21 Sep 2020 06:28:10 +0200 (CEST)
Subject: [Dx4win] Filter settings V8 > V9
In-Reply-To: <CAK-n8j6Eah35t8XNXT7oRag9TNU0D2XrctsBS1ThZFFk-hW6bQ@mail.gmail.com>
References: <3a95da9f-e854-f85e-fb0d-a24f5d66009d@dl1mgb.com><CAK-n8j6Eah35t8XNXT7oRag9TNU0D2XrctsBS1ThZFFk-hW6bQ@mail.gmail.com>
Message-ID: <20200921042810.1206612E1089@dd8204.kasserver.com>

Hi Jim,

unfortunately not. And no matter which log I opened in the version 8, it always showed the export filters. So it must be stored somewhere else.

73s Chris DL1MGB



Jim Reisert AD1C schrieb am 21.09.2020 02:51 (GMT +02:00):

> On Sat, Sep 19, 2020 at 12:43 AM Chris DL1MGB wrote:
> 
>> I am pretty new to Version 9 after several years staying with V8. Is there a
>> chance to copy the filter settings I created over the years from Version 8 to
>> Version 9?
> 
> Filter settings should be stored in your logbook (.DXL file).  So if
> you copied your logbook file from the V8 to the V9 "SAVE" directory,
> you should have them.
> 
> -- 
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us
> 
> 

From jjreisert at alum.mit.edu  Mon Sep 21 11:18:29 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Mon, 21 Sep 2020 09:18:29 -0600
Subject: [Dx4win] Filter settings V8 > V9
In-Reply-To: <20200921042810.1206612E1089@dd8204.kasserver.com>
References: <3a95da9f-e854-f85e-fb0d-a24f5d66009d@dl1mgb.com>
	<CAK-n8j6Eah35t8XNXT7oRag9TNU0D2XrctsBS1ThZFFk-hW6bQ@mail.gmail.com>
	<20200921042810.1206612E1089@dd8204.kasserver.com>
Message-ID: <CAK-n8j4JQ_BmmPXMTKYiuL+9y0mZ=61QJQnA5daxUPMfm83bTg@mail.gmail.com>

On Sun, Sep 20, 2020 at 10:28 PM Chris DL1MGB wrote:

> unfortunately not. And no matter which log I opened in the version 8, it always showed the export filters. So it must be stored somewhere else.

Oh, you mean the import/export filters.  I don't know if they are
compatible.  But you can try:

    * In the DX4WIN 8.05 SAVE directory, find dx4win.iep
    * In the DX4WIN 9.0x SAVE directory, the file is called impexpflt.dat

Save your original impexpflt.dat file.  They try copying dx4win.iep
from 8.05 over top of the existing impexpflt.dat file.  See if that
works.  If it messes everything up, then restore the original
impexpflt.dat file that you copied.

The files are not ASCII text so they are a little hard to read.  It
appears that the ADIF import/export filter is different between the
two versions.

If you go to File | Import/Export and click on a particular filter,
you can edit and/or print it.  But I do not see a way to export a
filter.   You may want to see if Paul can help here.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us

From jjreisert at alum.mit.edu  Wed Sep 23 10:19:41 2020
From: jjreisert at alum.mit.edu (Jim Reisert AD1C)
Date: Wed, 23 Sep 2020 08:19:41 -0600
Subject: [Dx4win] DX4WIN.CTY country file Release #20.16 - 23 September 2020
Message-ID: <mailman.331.1600870800.3112.dx4win@mailman.qth.net>

The DX4WIN country file, DX4WIN.CTY Release #20.16 is now available from:

    http://www.country-files.com/dx4win-info/

You can read the release notes at:

    http://www.country-files.com/dx4win-cty-20.16-23-september-2020/

DX4WIN 9 users should use Help | Check for Updates from the main menu.
Note that there may be a delay between this announcement and when the
updated country file is actually available.

Users of older versions of DX4WIN should use the DX4WIN Data Updater:

    https://dx4win.ad1c.us/updater/

Please inform me of any corrections.

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us