[Dx4win] Rotator control
Jim Rhodes
jimk0xu at gmail.com
Mon Jan 13 13:07:23 EST 2020
Since you say that com 2 no longer shows up in device manager that is the
first place to look. First look for hidden devices to see if it has somehow
been hidden. Are your serial ports actual serial ports or USB adapters?
On Mon, Jan 13, 2020, 11:52 Leigh Sedgwick <exbpi at comcast.net> wrote:
> You probably have already tried switching USB cables...they do fail.
>
> GL de Mike
> K7PI
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net [mailto:
> dx4win-bounces at mailman.qth.net]
> On Behalf Of F6EXV
> Sent: Wednesday, December 11, 2019 09:41
> To: REFLECTOR dx4win <dx4win at mailman.qth.net>
> Subject: [Dx4win] Rotator control
>
> Hi all
> I used to have my Prosistel 70D rotor work perfectly with DX4Win.
> It no longer does, and the com port it was connected with (com 2) no longer
> shows on the device manager of my Windows 10.
> I tried com 1 on both DX4Win and Prosistel, it still does not work, and
> they
> cannot communicate.
> Any idea what I should check and/or modify ?
> Thanks + 73
> Paul F6EXV
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the DX4WIN
mailing list