[Dx4win] Can't Get PSK Going

[Jay Chamberlain]

Maybe I need to change something in the 7300 each time I go to PSK because
DX4WIN is set to PTT control but the 7300 doesn’t recognize i.

WSJT-x sets the mode (USB-D) and you select the freq.

NS4Jay

On Mon, Aug 17, 2020 at 02:07 Kostas SV1DPI <sv1dpi2 at gmail.com> wrote:

> You must select "ptt control" and not the com port in psk when this is
>
> the same you use in other operation
>
>
>
> 73 de Kostas SV1DPI
>
> Member of SZ1A team
>
> FT8 free op
>
>
>
> Στις 16/8/2020 10:51 μ.μ., ο Jay Chamberlain έγραψε:
>
> > Running an IC-7300. So far I have the radio and DX4WIN v9 talking to each
>
> > other to operate real time F9. It reads in the radio freq. no problem.
>
> >
>
> > When I open the PSK window and set TX PTT to com port 3, (the one used
> for
>
> > control) I must be getting a conflict because DX4WIN gives me an error
>
> > window and asks if I want to shut down the program or continue.
>
> >
>
> > I do get copy on the receiving side so the USB CODEX audio inputs are
>
> > working.
>
> >
>
> > Any advice would be appreciated.
>
> >
>
> > NS4Jay
>
> > Jay Chamberlain
>
> > Fredericksburg, VA
>
> > USI Committee
>
> > www.usislands.org
>
> > ______________________________________________________________
>
> > DX4WIN mailing list
>
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
>
> > Help: http://mailman.qth.net/mmfaq.htm
>
> > Post: mailto:DX4WIN at mailman.qth.net
>
> >
>
> > This list hosted by: http://www.qsl.net
>
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
>
> DX4WIN mailing list
>
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>
> Help: http://mailman.qth.net/mmfaq.htm
>
> Post: mailto:DX4WIN at mailman.qth.net
>
>
>
> This list hosted by: http://www.qsl.net
>
> Please help support this email list: http://www.qsl.net/donate.html

-- 
NS4Jay