[Dx4win] Printing with Brother DK-1201 labels?

[Kostas SV1DPI]

Eric I would suggest to study my notes here abt how to setup the printer

https://www.qsl.net/sv1dpi/en/dx4win/printqsos.html

73 de Kostas SV1DPI
Member of SZ1A team
FT8 free op

Στις 1/8/2020 12:48 π.μ., ο Eric Rosenberg έγραψε:
> I'm having a terrible time printing Brother DK-1201 labels with my Brother
> QL-550  printer.
>
> The printer is similar to the Dymos, being a Die Cut PC Label Printer, with
> the labels on a spool not a sheet.
>
> The label size is 29 mm x 90 mm (1-1/7" x 3-1/2").
>
> I've set up a custom format, filling in only the following:
> Label Width and Label Height (3.500 and 1.140 inches)
> Nr across and Nr down (1 and 1)
> Paper size (custom)
> Page width and Page height ( (3.500 and 1.14 inches)
>
> All other dimensions are 0.000
>
> When I try to print, I get an error message "the roll of labels or tape
> inside the machine does not matches the one selected in the application."
> It also shows the paper size in the printer as being what I set it at, but
> the paper size in the application as 2-37"x2"
>
> I created another custom label using the label's metric size, but got the
> same error.
>
> My guess is that this is a DX4Win problem.
>
> Any thoughts or suggestions?
>
> 73,
> Eric W3DQ
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html