[Dx4win] WINKEY USB and DX4WIN

[Artek Manuals]

Max

It is a brand new WINKEY so I assume it is 3.1

I will try and find your prior post... ( I hate that apparently one must 
search the archive on mailman month by month instead of the entire archive)

Dave
NR1DX

On 5/23/2019 9:54 AM, Max Mucci, N5NHJ (I8NHJ) wrote:
> Hello Artek,
> What firmware do you have on the Winkeyer?
> Version 3.1 doesn't work, search for my previous posts.
> ----------------------
> 73 de Max, N5NHJ (I8NHJ)
>
> Thursday, May 23, 2019, 1:47:05 PM, you wrote:
>
>> Keith & Mike
>> Thanks ... When I do this ( And save changes and exit setup) then I hit
>> ALT-K which brings up the keyboard window, At the top of the Window it
>> says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer
>> when typed and I cant get to the Keyer set up from the Keyboard window)
>> If I immediately close DX4WIN and open N1MM+ ...winkey is immediately
>> recognized in N1MM and I am able to talk through the keyer with stored
>> messages or in keyboard mode and it sends CW to the radio no problem
>> Restarting DX4WIN ( or the computer) does not change anything
>> ??????????
>> Dave
>> On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote:
>>> Dave NR1DX:
>>>
>>> In the*File > Preferences > CW window I simply have Device Type:
>>> WinKey and External keyer Port: Com 10 (yours is Com 2) all the others
>>> have None.*
>>>
>>> _Now here is the other main part: _Alt-K brings up the keyer window in
>>> DX4WIN. Then right-click on that window and bring up the Settings for
>>> the WinKey itself.
>>>
>>> Here is what I have:
>>>
>>> Keyer Mode: Iambic A       Pin 5 Config: 5=PTT Priority: Normal
>>> Hang Time: 1:00
>>>
>>> There are other Mode Register settings below that but those are for
>>> the spacing and weight etc.
>>>
>>> Once everything is running you can either use the knob on the WinKey
>>> itself to change the speed or Alt-F9 and Alt-F10 on the keyboard.
>>>
>>> Mine works fine here.
>>>
>>> Keith W3KB
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* dx4win-bounces at mailman.qth.net
>>> <dx4win-bounces at mailman.qth.net> on behalf of Artek Manuals
>>> <Manuals at ArtekManuals.com>
>>> *Sent:* Thursday, May 23, 2019 4:38 AM
>>> *To:* DX4WIN at mailman.qth.net
>>> *Subject:* [Dx4win] WINKEY USB and DX4WIN
>>> Maybe I am just dense but I cant seem to successfully configure DX4WIN
>>> to use WINKEY-USB keyer.
>>>
>>> Running a TS990 on the serial port (not USB port) on COM 1,� which talks
>>> to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just
>>> fine in stand alone with the demo program and also with N1MM+ contest
>>> logger but I cant seem to find the secret phrase to get it to talk to
>>> DX4WIN. Have tried about just every combo I can thing of in the
>>> <preferences><CW> window
>>>
>>> �....Help!
>>>
>>> Dave
>>> NR1DX
>>> manuals at artekmanuals.com
>>>
>>> -- 
>>> Dave
>>> Manuals at ArtekManuals.com
>>> www.ArtekManuals.com <http://www.ArtekManuals.com>
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> ______________________________________________________________
>>> DX4WIN mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:DX4WIN at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Dave
Manuals at ArtekManuals.com
www.ArtekManuals.com