[Dx4win] WINKEY USB and DX4WIN

[Artek Manuals]

Keith & Mike

Thanks ... When I do this ( And save changes and exit setup) then I hit 
ALT-K which brings up the keyboard window, At the top of the Window it 
says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer 
when typed and I cant get to the Keyer set up from the Keyboard window)

If I immediately close DX4WIN and open N1MM+ ...winkey is immediately 
recognized in N1MM and I am able to talk through the keyer with stored 
messages or in keyboard mode and it sends CW to the radio no problem

Restarting DX4WIN ( or the computer) does not change anything

??????????

Dave

On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote:
> Dave NR1DX:
>
> In the*File > Preferences > CW window I simply have Device Type: 
> WinKey and External keyer Port: Com 10 (yours is Com 2) all the others 
> have None.*
>
> _Now here is the other main part: _Alt-K brings up the keyer window in 
> DX4WIN. Then right-click on that window and bring up the Settings for 
> the WinKey itself.
>
> Here is what I have:
>
> Keyer Mode: Iambic A       Pin 5 Config: 5=PTT Priority: Normal      
> Hang Time: 1:00
>
> There are other Mode Register settings below that but those are for 
> the spacing and weight etc.
>
> Once everything is running you can either use the knob on the WinKey 
> itself to change the speed or Alt-F9 and Alt-F10 on the keyboard.
>
> Mine works fine here.
>
> Keith W3KB
>
>
> ------------------------------------------------------------------------
> *From:* dx4win-bounces at mailman.qth.net 
> <dx4win-bounces at mailman.qth.net> on behalf of Artek Manuals 
> <Manuals at ArtekManuals.com>
> *Sent:* Thursday, May 23, 2019 4:38 AM
> *To:* DX4WIN at mailman.qth.net
> *Subject:* [Dx4win] WINKEY USB and DX4WIN
> Maybe I am just dense but I cant seem to successfully configure DX4WIN
> to use WINKEY-USB keyer.
>
> Running a TS990 on the serial port (not USB port) on COM 1,� which talks
> to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just
> fine in stand alone with the demo program and also with N1MM+ contest
> logger but I cant seem to find the secret phrase to get it to talk to
> DX4WIN. Have tried about just every combo I can thing of in the
> <preferences><CW> window
>
> �....Help!
>
> Dave
> NR1DX
> manuals at artekmanuals.com
>
> -- 
> Dave
> Manuals at ArtekManuals.com
> www.ArtekManuals.com <http://www.ArtekManuals.com>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Dave
Manuals at ArtekManuals.com
www.ArtekManuals.com