[Dx4win] TS890 and DX4win

[rgarrett5 at comcast.net]

Hello Jim et al,

Something as simple asw unchecking the box and typing in the new baud rate did it.  Everything is working FB.  73, Bob K3UL

-----Original Message-----
From: Jim Reisert AD1C <jjreisert at alum.mit.edu> 
Sent: Monday, March 18, 2019 4:13 PM
To: rgarrett5 at comcast.net
Cc: Paul Van Der Eijk <pvandereijk at gmail.com>; Rick Murphy <k1mu.nospam at gmail.com>; DX4WIN <DX4WIN at mailman.qth.net>
Subject: Re: [Dx4win] TS890 and DX4win

> Today I wanted to increase the baud rate for all of my programs.
> I was using the Radio Setting of TS990 and baud rate of 9600.
> How do I change the baud rate to a faster speed and what radio configuration are others using with their TS890?

Hi Bob,

You do not say which version of DX4WIN you are running.

To change the baud rate, Go into Preferences, on the Radio tab.  You have to uncheck the box under the Baud Rate field that says "Default".
Then you can type in any baud rate you want.

I believe most/all Kenwood radios have the same set of radio commands, so picking the TS-990 setting will probably work OK.

- Jim

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us