[Dx4win] Communication between DX4WIN and IC7600 does not work

[Mel SM0MPV]

Thanks David,
I changed settings according to your suggestions and it worked.
You made my evening.
73 de Mel/SM0MPV

Den sön 30 juni 2019 kl 21:47 skrev David Kozinn, K2DBK <k2dbk at arrl.net>:

> Hi Mel,
>
> I've got the same radio and am running the same version of Windows.
>
> My setup is similar to yours, though I've slightly modified the
> ON4AOI_500Hz to turn the filter off. I'm also using a baud rate of 19200
> instead of 9600, although as long as the settings in DX4WIN match the radio
> it should work fine.
>
> One other difference is that I've got the poll rate set to 1000ms. I'd try
> dropping to that to see if it makes a difference.
>
> If you want, I can send you the .rig file I'm using (I don't think the
> list allows attachments).
>
> One other thing, had this been working at some point but stopped, or is
> this your first try at getting it going?
>
> 73,
> David, K2DBK
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
> Behalf Of Mel SM0MPV
> Sent: Sunday, June 30, 2019 3:00 PM
> To: dx4win <Dx4win at mailman.qth.net>
> Subject: [Dx4win] Communication between DX4WIN and IC7600 does not work
>
> Communication between DX4WIN and my ICOM 7600 does not work.
>
> If I would like to grab a station from the Band Map the frequency changes
> accordingly in the Frequency field but after approximately 5 seconds it
> changes back to the previous frequency and nothing happens on the radio.
>
> However, information from radio to program works nicely. If I turn the VFO
> frequency changes in the Frequency field accordingly. The same is true for
> band and mode changes.
>
> Both N1MM and DXlog works nicely both directions.
> I need help with suggestions what to do?
> --
> 73 de Mel - SM0MPV
> 8S0C - Contest Call
>
> Radio: ICOM 7600
> Computor: IBM Thinkpad, X230, Processor i7-3250 CPU 2.90 GHz Docking
> station: ThinkPad UltraBase Serie
> Connection: USB-cable
>
> Silicon Labs CP210X USB to UART Bridge v. 10.1.8.2466
>      ‒ Port settings 9600 Bit/s, 8, N, 1, Flow control: None
>
> Windows 10 v.1903
>
> DX4WIN v. 9.0.6.1228
> Rig settings:
>      ‒ ICOM 7600_250MHz by ON4AOI
>      ‒ Address 7A
>      ‒ Baud rate 9600
>      ‒ Poll rate 5000 ms
>      ‒ Max tries 6
>      ‒ DTR high and RTS high both enabled
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>