[Dx4win] Printer "setup" problem in v9.05?

[John K9EL]

Lee,

I just tried printing in Landscape mode with version 9.0.5 and it worked
fine.

73, John K9EL

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Lee Hallin
Sent: Tuesday, June 18, 2019 1:48 PM
To: Lee Hallin <hallinl at lanecc.edu>; dx4win at mailman.qth.net
Subject: [Dx4win] Printer "setup" problem in v9.05?

Running on a PC running Windows 7 Pro.

I don't know if this a general problem or one related to, perhaps, my
printer (HP LJ 4000, parallel port connected).

If I click WINDOWS -> Logbook
Then Right click and click PRINT, then click Setup -> Landscape -> OK, then
OK to actually print, I get the Logbook printed in "Portrait" instead of
Landscape.

I did it twice and the same behavior.

For grins, I tried the same scenario using DX4WIN v9.01 on a different PC
and a different printer and it printed in landscape.  Don't know if it
printed in Landscape because there is an issue with Setup on my HP LJ 4000?
Or if it is related to the DX4WIN version 0.05 vs v9.01.

Has anyone else seen this behavior?

73,
Lee  N7NU

P.S.  I upgraded from v9.04 to 9.05.  DX4WIN restarted and I did the above
scenario.  I did NOT re-boot between the upgrade and running the above
scenario.  I'll reboot the PC tonight (when I get home) and see if that
makes a difference.