[Dx4win] DX4win / WINKEY interface still apparently broken

[Artek Manuals]

I have a different version of the problem

The short version is that when sending CW from DX4win using WINKEY ( 
ALT-K) the DOT and DASH are reversed?

  I was using DX4WIN 9.03 and Winkey Firmware 30.1 ( Firmware 31.2 would 
not work with DX4WIN 9.03...known bug)

Today I upgraded DX4WIN to 9.05 now NEITHER version of Winkey Firmware ( 
30.1 nor 31.2) work correctly with DX4WIN ....... 8^(

WINKEY still works correctly with other programs, most notably N1MM with 
both versions of the Winkey firmware. So PAUL I assume the bug is still 
resides on your side of the aisle

Dave
NR1DX


On 6/18/2019 8:01 PM, Courtney Judd wrote:
> upgraded to latest 9.05 and the winkeyer doesn't work. I am using 
> FT5000 with microKeyer2. Everything worked in previous version but now 
> radio keys up and it acts like it is sending but nothing happening. 
> Checked both dx4win and microham software but don't see what needs to 
> be adjusted... radio and PTT is on com5 and winkeyer on com4.... any 
> ideas? 73's Cort K4WI
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Dave
Manuals at ArtekManuals.com
www.ArtekManuals.com


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus