[Dx4win] Rig CAT

[kostas sv1dpi]

Hello Mark

If you want dx4win shows always the radio frequency you need to go to 
file>preferences>packet1 and Uncheck "Update QSO window" box.

Personally I prefer to have it changing (box ticked) as this way I can 
check country, zone,etc windows for this call

73 Kostas SV1DPI

Στις 10/2/2019 17:44, ο Mark Endorf έγραψε:
> Hello,
> I just recently noticed that in the QSO logging screen when I am ready to
> add a new QSO, the band indicates correctly what it is receiving from the
> radio. However when the cluster is active, and feeding very frequent spots,
> the band will briefly change to match the spot received. I am almost 100%
> sure this is not the way it has behaved in the past. If you are about to
> enter a QSO, the log window should only be looking at the radio CAT data for
> the band.
> I do not have focus on the spot window, and everything seems to be working
> as it should. I just do not ever remember the grayed out band data
> constantly changing as the cluster spots are received.
> Is this normal?
>
> 73
> Mark WA0MHJ
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html