[Dx4win] Rotator control

[ON4AOI]

Paul,
Check first if you get com1 and com2 working again in Windows10
Best to check with a break outbox if they are still ok.  

Do not known if these coms are real RS232 ports with hardware
or USB to serial connectors, in the last case it is possible that you
have Chinese clones. Windows software updates installs the original
producent his drivers and when that driver recognize a clone they
make sure it doesn't work anymore with the (new) latest driver. 

Guy ON4AOI - OT7K
 

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of F6EXV
Sent: Wednesday, December 11, 2019 6:41 PM
To: REFLECTOR dx4win <dx4win at mailman.qth.net>
Subject: [Dx4win] Rotator control

Hi all
I used to have my Prosistel 70D rotor work perfectly with DX4Win.
It no longer does, and the com port it was connected with (com 2) no longer
shows on the device manager of my Windows 10.
I tried com 1 on both DX4Win and Prosistel, it still does not work, and they
cannot communicate.
Any idea what I should check and/or modify ?
Thanks + 73
Paul F6EXV
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html