[Dx4win] I don't see DX4WIN reading the freq of my 7300

[Jørgen Louis Christensen]

Hi Tim

I had the same problem but i just use the IC-7600 and change the hex-adress

Regards 5Q2J, Joe

Den 12-04-2019 kl. 03:48 skrev Tim moore:
> mine does show both the band and frequency. That is, if I'm adding a QSO
> usinig "Add Real-Time". If i add "off-line", then it does NOT show
> frequency automatically, I have to add it manually. But if I add a QSO
> using "add Real-Time".....even if i'm just in the "add Real-Time"
> mode....the computer/DX4WIN tracks both the frequency and the band (and the
> mode too). I'd make sure I had my radio settings correct in preferences.
> Pick the right rig....and have the right baud rate, comm port, poll rate,
> DTR, DTS....etc. have them set right on BOTH ends...radio menu AND DX4WIN
> settings.
>
> K4TK
>
>
>
> Tim Moore
> PMP
>
>
> On Thu, Apr 11, 2019 at 12:16 AM Mark Lunday <wd4elg at outlook.com> wrote:
>
>> Only the band is showing in the QSO window.  Is there a specific setting
>> that I need to check?
>>
>> Mark Lunday, WD4ELG
>> Greensboro, NC  FM06be
>> wd4elg at arrl.net<mailto:wd4elg at arrl.net>
>> http://wd4elg.blogspot.com
>> SKCC #16439  FISTS #17972  QRP ARCI #16497
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html