[Dx4win] how to Set RTTY mode on Flex?

[Kostas SV1DPI]

I have not big experience on this but let's try.

Go to file>Databases>radios

Select the flexradiossdr

The 2nd tab called Values. You will find below right, the "mode values"

Normally what you need is the Read/Write values. Mine are set to 6,9 and 
6,9 for RTTY, while psk has 255 in all boxes.

Check if you have the same with me or not. If not you are lucky! If 
these are the same you need to experiment but I don't know more... Maybe 
when make test /read and you have the radio on rtty, you can find the 
right to fill the Write boxes. Let us know the results.


...73 de Kostas SV1DPI
   (One of SZ1A-EP6T)

Στις 27/9/2018 12:24 μμ, ο Tonno Vahk έγραψε:
> hi,
>
> I have Flex CAT set via FlexradioSSDR over virtual COM port created in SmartSDR CAT. Everything else works great but when clicking on a RTTY spot in DX4WIN the mode on Flex is set to DIGL not RTTY.
>
> I know the MD command nr 6 sets DIGL. I think it has remained from older times when Flex used DIGL for RTTY. How now to make DX4WIN set correct mode RTTY?
>
> In Win-Test there is workaround through Omnirig which lets to select ZZMD30 command for correctly setting mode to RTTY. But no Omnirig in DX4WIN.
>
> Any ideas how to solve this??
>
> 73
> Tonno
> ES5TV
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to sv1dpi at otenet.gr
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html