[Dx4win] Multiple Calls - LOTW - QSLing

[Dan Violette]

Not sure of specific problem but want to make sure you understand that Group
000 is ALL CALLS.  So, if you select Group 000 all QSOs/QSLs from your log
are selected, no matter the actual call used or group number.   Group 000
would select your Groups 000, 001, 002 and any others you create.

Dan KI6X

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of William Liporace
Sent: Saturday, January 20, 2018 7:25 AM
To: Dx4win at Mailman. Qth. Net <dx4win at mailman.qth.net>
Subject: [Dx4win] Multiple Calls - LOTW - QSLing

OK, I guess I am missing something and have tried following the info here:
http://dx4win.ad1c.us/appnotes/nr7.html

It appears that two of my group filters may work, but one does not. I want
to be able to filter my log so I can sign and upload the correct info.

So I have created three Groups - One for each call
000 - WC2L
001 - NA2NA
002 - KB2HUN

Under Selection Editor I created three Selections
000 - WC2L-QSL
001 - NA2NA-QSL
002 - KB2HUN-QSL
They are all Group/Date filters  The WC2L & KB2HUN appear to work, The NA2NA
does not. They are all configured what I think is right. I have not tested
any of them.

Ideas and Suggestions??
TNX Will WC2L
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to danki6x at socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html