[Dx4win] Data Mode

[ON4AOI]

Larry, Jim
Will get back soon on this after I fixed my 2M EME system again
Heavy storms broke 8 x 1/2 bolts so now fixing it with ropes




-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Thursday, January 18, 2018 2:55 PM
To: Larry Burke
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Data Mode

On Thu, Jan 18, 2018 at 6:50 AM, Jim Reisert AD1C wrote:

> On Thu, Jan 4, 2018 at 11:07 AM, Larry Burke K5RK wrote:
>
>> I'm using DX4WIN with an Icom IC-7851. The CAT controls work well 
>> however DX4WIN does not seem to recognize when the rig is set to the 
>> DATA mode (e.g., USB-D1). DX4WIN just sees the rig as being in the 
>> SSB mode. Is there a way to have DX4WIN recognize when the rig is in the
DATA mode?
>
> While there is a "DATA" mode that can be logged in DX4WIN, aren't you 
> really operating PSK, WSJT or some other "data" mode in these cases?
> Which mode should DX4WIN pick?
>
> Contact me off-line.  Assuming that IC-7851 and IC-7610 have the same 
> mode encodings, I can send you a modified .RIG file that will report 
> "DATA" mode.

Larry, looking at the command set, I do not think this can be done easily.
The DATA mode(s) are in a different byte of the command response than the
main modes (CW, SSB etc.).  Maybe Guy ON4AOI will have an idea.

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to on4aoi at skynet.be

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html