[Dx4win] DX4WIN and WSJT-X

[Ernie]

Mark,

I have been using LP-Bridge to make all of the radio control stuff play 
nice with my Yaesu for quite a while. Unfortunately it doesn't list Icom 
as being supported, so probably not any help for you. If DX4WIN would 
work with OmniRig, we would have another solution.

Another alternative for you would be to look into some of the com port 
splitting software to allow two different programs access to one com port.

For others who have Yaesu, Kenwood, Elecraft:
It was a little frustrating to get LP-Bridge  and all of the programs to 
play together on my Yaesu FT-950, but in the end I have DX4WIN, WSJT-X, 
N1MM, and HDSDR all playing together getting CAT info and controlling 
the rig.

Now all of my programs know where the rig is parked and can control it.

http://www.telepostinc.com/LPB2.html

I leave LP-Bridge running all of the time. When operating, I turn on the 
rig and start the needed programs.

Ernie W8EH



On 12/15/2018 6:32 PM, Mark Weiss via DX4WIN wrote:
> I've used DX4WIN for many years.  It controls my IC-7800 perfectly, as
> expected.
>   
> Now I'd like to also be able to control my transceiver by WSJT-X, as well.
>   
> The problem is that they both fight for control of the rig.  DX4WIN usually
> wins and WSJT-X presents me with an error message.
>   
> Does anyone have a simple way to enable both programs to control the rig
> concurrently?
>   
> Tnx & 73,
>   
> Mark, K6FG
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to w8eh.ernie at gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html