[Dx4win] CAT

[ON4AOI]

Hi Cesar
This looks normal to me since polling the radio(s) >>--- FOR ALL BRANDS ---
only starts when you push F9 and not before.

When you start using for example WSJT(-x) and your radio is "NOT ON" but 
configured in the setup the program crashes all the time until your radio is
ON.  

So the reason is very simple if your Radio was "NOT ON" in dx4win you will
get time out etc
Not a crash but before F9 you have the option to start with or without
Radio.

Guy ON4AOI  

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of PY2YP
Sent: Tuesday, October 24, 2017 3:10 PM
To: DX4WIN Reflector
Subject: [Dx4win] CAT

I have a FT-2000 correctly wired, everything works fine except that the
DX4WIN only sends data to the radio when the log entry is set to receive
data input, F9 pressed. When the DX4WIN is not set for data input the radio
remains connected but no sends information to the peripherals, as SPE
amplifier or antenna switch, say, if I change the band on the radio the
amplifier and antenna switch remain where they were, no band switches. It
also happens with the band map window, say, its only follow the radio if the
F9  was pressed. This behavior doesn't happen when using WSJT, MMTTY for
example. I've had this problem from DX4WIN previous versions and also when
using FT-1000MP and FT-1000MP Mark V.

Can someone using Yaesu try to replicate this issue, please?

--
73 DX de PY2YP - Cesar
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to on4aoi at skynet.be

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html