[Dx4win] Correcting Mode for QSOs made before DX4WIN 9.01

[Joe Subich, W4TV]

 > If you added mode mappings to the Trusted QSL software, you may want
 > to remove those too.  How to do this is beyond the scope of the DX4WIN
 > reflector.

Open tQSL
Select File ->Display or Modify Preferences
Select the ADIF Modes tab
Select each temporary mapping (e.g., FAX -> DATA, FT8 -> DATA, etc.)
     and click Delete

If you had temporary mode mappings and/or used a custom mode, you *will*
want to upload all the QSOs that contained custom modes to LotW again. 
If you do not upload using the correct mode, any confirmations will be
good for DXCC (DATA) and VUCC (mixed mode only) but the confirmations
can not be used for WAS mode specific (e.g., FT8, JT65, KT9, etc.)
endorsements.

73,

    ... Joe, W4TV


On 10/20/2017 2:03 PM, Jim Reisert AD1C wrote:
> Some of you may have used a different mode to log an unsupported mode
> in your earlier version of DX4WIN.  For example, you may have used FAX
> as a placeholder for FT8.  If you have upgraded to 9.01, now is the
> time to fix these.
> 
> Using F8, search for the placeholder (substitute) mode you used, for
> example, FAX.  Now go to QSO | Multiple QSO Operations | Set Mode.
> You will be presented with a dialog box that allows you to set the
> correct mode or submode as needed for all the selected (found) QSOs.
> 
> You may also want to clear the LoTW upload date and set the LoTW
> upload flag for these QSOs as well.  The next time you Export for
> LoTW, these QSOs will also be included, the mode field having been
> corrected.  This is just in case you made an error uploading these
> QSOs to LoTW the first time.
> 
> If you added mode mappings to the Trusted QSL software, you may want
> to remove those too.  How to do this is beyond the scope of the DX4WIN
> reflector.
> 
> 73 - Jim AD1C
>