[Dx4win] An exceptional occurred

[Arne N7KA]

I recently went through this same exercise.  Received help directly from Paul.  In the end, after several tries, he suggested I note all settings, then delete the .cfg file.

After doing so I logged back into DX4WIN then clicked on FILE/PREFERENCES and re-entered all the data applicable to my station.  Luckily I had written down the info needed to allow DX4WIN and my radios to communicate (IN "RADIO" tab).

I then exited the program being sure to SAVE when asked.  The problem was corrected. 

Hope this will help.

Arne N7KA


> On November 22, 2017 at 9:03 AM "wo2n at att.net" <wo2n at att.net> wrote:
> 
> 
> Fixed column count must be less than Collin count
> I brought it up this morning windows 10 version 805 this is what I got all the windows are corrupted
> I tried copying her old INI file but that didn’t work either
> Any suggestions greatly appreciated
> All of the personal info is now blank
> Bernie:WO2N
> 
> Sent from my iPhone
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to n7ka at comcast.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html