[Dx4win] CW keyboard Function keys wont key transmitter

[wo2n at att.net]

Problem solved -done by trial and error 
I had to touch the function key &the escape key (lock)at the same time!!!
 toggle's the F keys macro back to the function key you can toggle back-and-forth
73 thank you all for responding and helping me through this
73 de Bernie/WO2N
PS: now I’m looking at the quick start guide  function plus escape toggle function key lock. 
 FN+Esc

Sent from my iPhone

> On Nov 17, 2017, at 8:14 PM, Joe Subich, W4TV <lists at subich.com> wrote:
> 
> 
>> May be a DX4win issue but it also doesn’t working in NN1M logger which leads me to believe it’s a computer the computer is the
>> problem here and I don’t know what controls the F keys software on
>> the computer
> Sounds like you are using a laptop where the function keys control
> multi-media options (brightness, alternate screens, fast forward/
> reverse, volume,etc.) by default and you need to hold a key marked
> FN to use F1-F12.  Most have a configuration application or a BIOS
> setting to "flip" the multimedia/function operation.  Unfortunately,
> there is no standard trick ... you will need to read the documentation
> for your particular computer.
> 
> 73,
> 
>   ... Joe, W4TV
> 
> 
>> On 11/17/2017 5:47 PM, wo2n at att.net wrote:
>> Exactly that’s exactly what I mean
>> Cw keying the keyboard it works from the keys on the keyboard but not the F keys macros
>> May be a DX4win  issue but it also doesn’t working in NN1M logger which leads me to believe it’s a computer the computer is the problem here and I don’t know what controls the F keys software on the computer
>> It was also suggested you start the computer you have to go into the bios and switch the keyboard there?
>> 73 de Bernie/WO2N.>
>> Sent from my iPhone
>>> On Nov 17, 2017, at 5:00 PM, Joe Subich, W4TV <lists at subich.com> wrote:
>>> 
>>> 
>>>> except the keyboard the keyboard is only hot at the keys
>>>> now F functions don’t control anything in the logging program
>>> 
>>> I do not understand this statement.  If you are talking abut the
>>> computer keyboard - that you can send from the keyboard in the
>>> DX4win CW window but the F-keys are non responsive there, that
>>> is a configuration issue in DX4Win (probably a failure to program
>>> the F-keys).  If you mean something else, you will have to be
>>> more specific.
>>> 
>>> 73,
>>> 
>>>   ... Joe, W4TV
>>> 
>>> 
>>>> On 11/17/2017 3:54 PM, wo2n at att.net wrote:
>>>> Thank you for the reply and finding my query
>>>> Rig - Kenwood TS 570 D
>>>> DX4win was working fine on my old computer same set up with PS2-all I did was take the DX program copied it on a memory stick put it in to the new computer
>>>> everything is working fine (PS2)etc
>>>> except the keyboard the keyboard is only hot at the keys
>>>> now F functions don’t control anything in the logging program
>>>> Do you still want me to go through the MicroKey II settings???
>>>> Thank you Bernie/WO2N.>
>>>> Sent from my iPhone
>>>>> On Nov 17, 2017, at 3:23 PM, Joe Subich, W4TV <lists at subich.com> wrote:
>>>>> 
>>>>> 
>>>>> What transceiver are you using?
>>>>> 
>>>>>> The CW window running MicroKey II  winkey
>>>>> 
>>>>> In microHAM USB Device Router ...
>>>>>  1) make sure Router is reading the transceiver mode and
>>>>>     that the transceiver is in CW
>>>>>  2) Select the PTT tab - is there a *BLACK* box around CW
>>>>>     in the PTT Selector?
>>>>>  3) Set CW PTT to PTT1 (microphone jack) and make sure
>>>>>     the microphone cable is connected to the mic jack of
>>>>>     your transceiver.
>>>>> 
>>>>> Alternately, make sure semi break-in (CW VOX) is enabled in
>>>>> your transceiver and the transceiver PTT Out (amplifier PTT)
>>>>> is connected to PTT_IN on the rear panel of MK II (so MK II
>>>>> know when your transceiver has switched to transmit).
>>>>> 
>>>>> 73,
>>>>> 
>>>>>   ... Joe, W4TV
>>>>> 
>>>>> 
>>>>>> On 11/17/2017 12:43 PM, wo2n at att.net wrote:
>>>>>> New computer windows 10  DX4 ver8.05
>>>>>> function keys does not it work to send CW from CW window
>>>>>> the keyboard characters keys sendCW  to radio
>>>>>> The CW window running MicroKey II  winkey
>>>>>> It’s in keyboard mode instead of function mode to send CW
>>>>>> also I can click on the function keys on the screen and that works
>>>>>> But the F keys don’t respond
>>>>>> The keyboard is hot but the function don’t work
>>>>>> I have to switch from keyboard the function keys
>>>>>> Right now nothing seems to be responding to the change
>>>>>> Thanks for any help 73 Bernie /W02N
>>>>>> Sent from my iPhone
>>>>>> ______________________________________________________________
>>>>>> DX4WIN mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>>> Message delivered to lists at subich.com
>>>>>> This list hosted by: http://www.qsl.net
>>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> ______________________________________________________________
>>>>> DX4WIN mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>> Message delivered to wo2n at att.net
>>>>> 
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html