[Dx4win] CW keyboard Function keys wont key transmitter

[wo2n at att.net]

Exactly that’s exactly what I mean
Cw keying the keyboard it works from the keys on the keyboard but not the F keys macros
May be a DX4win  issue but it also doesn’t working in NN1M logger which leads me to believe it’s a computer the computer is the problem here and I don’t know what controls the F keys software on the computer
It was also suggested you start the computer you have to go into the bios and switch the keyboard there?
73 de Bernie/WO2N.>

Sent from my iPhone

> On Nov 17, 2017, at 5:00 PM, Joe Subich, W4TV <lists at subich.com> wrote:
> 
> 
> > except the keyboard the keyboard is only hot at the keys
> > now F functions don’t control anything in the logging program
> 
> I do not understand this statement.  If you are talking abut the
> computer keyboard - that you can send from the keyboard in the
> DX4win CW window but the F-keys are non responsive there, that
> is a configuration issue in DX4Win (probably a failure to program
> the F-keys).  If you mean something else, you will have to be
> more specific.
> 
> 73,
> 
>   ... Joe, W4TV
> 
> 
>> On 11/17/2017 3:54 PM, wo2n at att.net wrote:
>> Thank you for the reply and finding my query
>> Rig - Kenwood TS 570 D
>> DX4win was working fine on my old computer same set up with PS2-all I did was take the DX program copied it on a memory stick put it in to the new computer
>> everything is working fine (PS2)etc
>> except the keyboard the keyboard is only hot at the keys
>> now F functions don’t control anything in the logging program
>> Do you still want me to go through the MicroKey II settings???
>> Thank you Bernie/WO2N.>
>> Sent from my iPhone
>>> On Nov 17, 2017, at 3:23 PM, Joe Subich, W4TV <lists at subich.com> wrote:
>>> 
>>> 
>>> What transceiver are you using?
>>> 
>>>> The CW window running MicroKey II  winkey
>>> 
>>> In microHAM USB Device Router ...
>>>  1) make sure Router is reading the transceiver mode and
>>>     that the transceiver is in CW
>>>  2) Select the PTT tab - is there a *BLACK* box around CW
>>>     in the PTT Selector?
>>>  3) Set CW PTT to PTT1 (microphone jack) and make sure
>>>     the microphone cable is connected to the mic jack of
>>>     your transceiver.
>>> 
>>> Alternately, make sure semi break-in (CW VOX) is enabled in
>>> your transceiver and the transceiver PTT Out (amplifier PTT)
>>> is connected to PTT_IN on the rear panel of MK II (so MK II
>>> know when your transceiver has switched to transmit).
>>> 
>>> 73,
>>> 
>>>   ... Joe, W4TV
>>> 
>>> 
>>>> On 11/17/2017 12:43 PM, wo2n at att.net wrote:
>>>> New computer windows 10  DX4 ver8.05
>>>> function keys does not it work to send CW from CW window
>>>> the keyboard characters keys sendCW  to radio
>>>> The CW window running MicroKey II  winkey
>>>> It’s in keyboard mode instead of function mode to send CW
>>>> also I can click on the function keys on the screen and that works
>>>> But the F keys don’t respond
>>>> The keyboard is hot but the function don’t work
>>>> I have to switch from keyboard the function keys
>>>> Right now nothing seems to be responding to the change
>>>> Thanks for any help 73 Bernie /W02N
>>>> Sent from my iPhone
>>>> ______________________________________________________________
>>>> DX4WIN mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>> Message delivered to lists at subich.com
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>> ______________________________________________________________
>>> DX4WIN mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:DX4WIN at mailman.qth.net
>>> Message delivered to wo2n at att.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html