[Dx4win] CW keyboard Function keys wont key transmitter

[Joe Subich, W4TV]

What transceiver are you using?

 > The CW window running MicroKey II  winkey

In microHAM USB Device Router ...
   1) make sure Router is reading the transceiver mode and
      that the transceiver is in CW
   2) Select the PTT tab - is there a *BLACK* box around CW
      in the PTT Selector?
   3) Set CW PTT to PTT1 (microphone jack) and make sure
      the microphone cable is connected to the mic jack of
      your transceiver.

Alternately, make sure semi break-in (CW VOX) is enabled in
your transceiver and the transceiver PTT Out (amplifier PTT)
is connected to PTT_IN on the rear panel of MK II (so MK II
know when your transceiver has switched to transmit).

73,

    ... Joe, W4TV


On 11/17/2017 12:43 PM, wo2n at att.net wrote:
> 
> New computer windows 10  DX4 ver8.05
> function keys does not it work to send CW from CW window
> the keyboard characters keys sendCW  to radio
> The CW window running MicroKey II  winkey
> It’s in keyboard mode instead of function mode to send CW
> also I can click on the function keys on the screen and that works
> But the F keys don’t respond
> The keyboard is hot but the function don’t work
> I have to switch from keyboard the function keys
> Right now nothing seems to be responding to the change
> Thanks for any help 73 Bernie /W02N
> 
> Sent from my iPhone
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to lists at subich.com
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>