[Dx4win] "Check for Updates" and cluster restart

[Mike Cizek W0VTT]

Hello Chris,

Go to File > Preferences > Packet2 and make sure you have Cluster node auto
connect enabled, your callsign and a Node address entered.

-- 
73,
Mike Cizek WØVTT
-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Chris Sauvageot
Sent: Tuesday, November 07, 2017 03:15
To: dx4win at mailman.qth.net
Subject: [Dx4win] "Check for Updates" and cluster restart

After "Check for Updates" function dx4win close and do a restart - but 
cluster starts not automatically again ( like at normal dx4win start)

73 Chris
DL5NAM

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to mgcizek at gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html