[Dx4win] A Minor Issue

[Mike Cizek W0VTT]

Hello John,

If you want to make and save changes to a QSO, use F10, Update QSO.  If you
are going through the log doing buro cards using the F2 key, hitting F2
after making the change will save the changes and do whatever else you have
it set to do in File > Preferences > F2 key.

-- 
73,
Mike Cizek WØVTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of John Holmes
Sent: Thursday, November 02, 2017 14:52
To: dx4win at mailman.qth.net
Subject: [Dx4win] A Minor Issue

I am running the latest version 9.02.1134 and noticed something odd. In
going through my incoming bureau QSL cards I found one for which I had
busted the call. I found him in my logbook viewer and brought the incorrect
QSO to the screen. Then I changed the callsign to the correct one and
pressed <enter>. I would have received a "Do you want to make the changes"
warning previously but this did not happen and the callsign could not be
corrected. If I changed the QSL route, etc. and pressed <enter>, the
modified QSL route would be saved and the corrected callsign would also be
saved.
Just a minor issue.
John W9ILY



______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to mgcizek at gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html