[Dx4win] Frequency main window (By default)

[Art - W6KY]

Just tap F9...
Should take DX4WIN to the radio freq and it's ready for input..

or the long way:
Tap QSO / Add Real Time
Then spin the dial.....

Art  W6KY
 .....................................................................................................



      From: Luis Teixeira <xx9tnh at gmail.com>
 To: DX4WIN Reflector <dx4win at mailman.qth.net> 
 Sent: Friday, June 16, 2017 4:18 AM
 Subject: [Dx4win] Frequency main window (By default)
   
I'm using one Yaesu FT1000 MP Mark V connected to DX4WIn V 8.05.
When I select one spot/station/frequency from cluster , radio goes to
frequency but ALWAYS on 17 m SSB showing exact frequency in Freq (MHz), no
matter what band the spot is.
What's happening? In Set-up parameters I have as Default 20 m SSB.
Thanks for your help.
Best 73 de Luis, CT4NH in behalf of CT1EEQ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html