[Dx4win] rstS - rstR

[Mike Rhodes]

Enrique,
1)  Attachments do not make it thru on this reflector.

2)  DX4Win is not set up to accept anything except 3 numbers in the RST 
fields. If you want to record the actual signal strength, you will need 
to enter it into the comments section. You 'may' be able to edit the ADI 
file so the signal strength goes to comments automatically but I am not 
sure.

Mike / W8DN
DX4Win Since Version 0.97


On 1/22/2017 10:55 AM, Enrique Rabczuk wrote:
> Hello,
>
>   
>
> I need help  My DX4Win is versión 8.05.
>
>   
>
> I already imported a JT65-HF Log file from DX4Win. The problem is the values
> it shows, 599. It should show values of -01 db or -06 db …..-015. Etc.
>
> Please see a picture attached.
>
>   
>
> 73
>
>   
>
> Enrique, CP6UA
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>