[Dx4win] How to change mapping for FT8

[Mike Cizek W0VTT]

Hello Dave,

In that case, you should not need to edit anything.  Make sure FT8 is
enabled as a mode:
File > Preferences > Station > Modes
Make sure you have FT8 selected as a valid mode for any awards you chase:
File > Awards > Valid Modes

In WSJT-X, do NOT check Convert Mode to RTTY or dB Report to Comments in
File > Settings > Reporting.

Now, you should (should being the operative word here!) be able to import
your WSJT-X file directly, have the mode appear correctly, and have the
signal reports appear in the proper fields.  If you are not logging the QSOs
directly in DX4WIN, and simply importing the WSJT-X adif file, it should
(there's that should word, again) not matter what radio you are using, or
whether your radio uses SSB or Data mode to work the digi modes.

-- 
73,
Mike Cizek WØVTT

-----Original Message-----
From: n4qs at vci.net [mailto:n4qs at vci.net] 
Sent: Tuesday, December 19, 2017 14:24
To: 'Mike Cizek W0VTT'; 'Wes Printz W3SE / ZL3TE'; dx4win at mailman.qth.net
Subject: RE: [Dx4win] How to change mapping for FT8

Hi Mike.  The latest version.  9.0.3

Dave, N4QS

-----Original Message-----
From: Mike Cizek W0VTT [mailto:mgcizek at gmail.com] 
Sent: Tuesday, December 19, 2017 2:22 PM
To: n4qs at vci.net; 'Wes Printz W3SE / ZL3TE' <zl3te at xtra.co.nz>;
dx4win at mailman.qth.net
Subject: RE: [Dx4win] How to change mapping for FT8

Hello Dave,

Which version of DX4WIN are you using?

--
73,
Mike Cizek WØVTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of n4qs at vci.net
Sent: Tuesday, December 19, 2017 14:21
To: 'Wes Printz W3SE / ZL3TE'; dx4win at mailman.qth.net
Subject: Re: [Dx4win] How to change mapping for FT8

Hi Wes,

I would like to avoid having to edit the ADIF file.  I would like DX4WIN to
be able to map the Remarks field to the Notes for this QSO field without any
manual manipulation of the ADIF file.  It would make importing of WSJT-X
files a snap.  I thought DX4WIN has a way to remap imports.

Dave, N4QS



-----Original Message-----
From: Wes Printz W3SE / ZL3TE [mailto:zl3te at xtra.co.nz]
Sent: Tuesday, December 19, 2017 12:44 PM
To: dx4win at mailman.qth.net; n4qs at vci.net
Subject: Re: [Dx4win] How to change mapping for FT8

Hi Dave,

You will need to edit the ADIF File.
Use Search and Replace     Replace Comment with Notes   Replace All/save.

73,
Wes, ZL3TE

> On December 20, 2017 at 7:03 AM n4qs at vci.net wrote:
> 
> Does anyone know how I can change the mapping for importing FT8 QSOs? 
> The remarks are currently going into the Notes for this Call field. I 
> always have to cut and paste to move them into the Notes for this QSO 
> field. How can I change the mapping so that the remarks go directly 
> into the Notes for this QSO field?
> 
> Thanks in advance.
> 
> 73,
> 
> Dave, N4QS
> 
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to zl3te at xtra.co.nz
> 
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
Message delivered to mgcizek at gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html