[Dx4win] IC-7300 - DX4WIN Interfacing issue

[Mike Cizek W0VTT]

Hello John,

 

This was on the reflector just the other day:

 

 

[Dx4win] CAT communications control file for IC-7300

 

Björn Ekelund Fri, 26 Aug 2016 10:53:33 -0700 bjorn at ekelund.nu

 

Through a fair amount of sweat and pain I have now developed a .rig file for
Icom IC-7300.

Since you cannot have attachments in this mailing list, please drop me a
line if you are interested.  I will also submit it for publishing on the
official .rig file web page.

 

When you use it, please keep in mind that you must enable "CI-V USB Echo
Back" if you unlink the REMOTE and USB interfaces.

 

Björn

 

 

73,

Mike W0VTT

 

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of 5b4ahk at gmail.com
Sent: Wednesday, 30 August, 2017 03:35
To: DX4WIN at mailman.qth.net
Subject: [Dx4win] IC-7300 - DX4WIN Interfacing issue

 

Hi, I have searched archives but not able to find much information regarding
this topic. All I basically want to do is be able to read and display the
radio frequency in the appropriate DX4WIN window and use the CW keyboard
facilities to transmit morse on the 7300, Simples!

I presume that this can be done with just the USB cable, have tried with the
7600 rig file and changing the hex code to 94, then re-booting but no luck.
Any ideas, thanks in advance

 

73

John G3SZG 5B4AHK

Sent from my mini iPad 

 

 

______________________________________________________________

DX4WIN mailing list

Home: http://mailman.qth.net/mailman/listinfo/dx4win

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:DX4WIN at mailman.qth.net

 

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html